Is there any way to make the removal of the TBI PROMs from their plastic carriers any easier. Right now I'm using a shortened razor blade to pull the pins out of their "slots" and remove the PROM, one side at a time. Just wondering if any of the PROM tuners here had some insight on either modifying the carrier or making some kind of tool to simplify removal.

-Mark W.
<A HREF="http://www.angelfire.com/al3/thegreycar">'88 SC Camaro w/ 305 TBI</A>

 

Push the prom into the carrier and pull the plastic tabs back a bit and when you release, the legs will come free.

 

yeah just squeeze the sides some and it pops out
i remember the stock type prom was a real PITA to take out, but the spares i bought were slightly wider and they pop out like nothing takes me not even 2 seconds