ATTN: People searching for or trying to sell custom PROMs
Thread Starter
Supreme Member
Joined: Jul 1999
Posts: 2,844
Likes: 4
From: Maryland
Car: 2005 Subaru STI
Engine: 153ci of Turbo Power!
Transmission: 6-Speed
ATTN: People searching for or trying to sell custom PROMs
This forum is for education, experiences, learning, and thought sharing. This board is not intended for those who are looking to buy or sell custom PROMs. Please resort to the classifieds, open your own website, or use personal E-Mail. This board was once a private board and now it is public. I would hate for this board to become a private board again due to things such as this (buyers/sellers).
Whew ... not trying to be a hardbutt. Just making sure that everyone understands. Now - get back to that assembly language and start programming some PROMS!
Tim
------------------
TRAXION's 1990 IROC-Z
Best Time = 12.244 @ 112.51mph (1.778 60' / 7.819@88.32mph in the 1/8)
All Natural. No Force. No Drugs. Stock Bottom End. Stock Body Panels.
Gunning for NA 11's after installing Hooker LT Headers and reducing weight.
-=ICON Motorsports=-
Moderator: PROM board at thirdgen.org
Whew ... not trying to be a hardbutt. Just making sure that everyone understands. Now - get back to that assembly language and start programming some PROMS!
Tim
------------------
TRAXION's 1990 IROC-Z
Best Time = 12.244 @ 112.51mph (1.778 60' / 7.819@88.32mph in the 1/8)
All Natural. No Force. No Drugs. Stock Bottom End. Stock Body Panels.
Gunning for NA 11's after installing Hooker LT Headers and reducing weight.
-=ICON Motorsports=-
Moderator: PROM board at thirdgen.org
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
[QUOTE]Originally posted by TRAXION:
[B]This forum is for education, experiences, learning, and thought sharing. This board is not intended for those who are looking to buy or sell custom PROMs. Please resort to the classifieds, open your own website, or use personal E-Mail. This board was once a private board and now it is public. I would hate for this board to become a private board again due to things such as this (buyers/sellers).
Whew ... not trying to be a hardbutt. Just making sure that everyone understands. Now - get back to that assembly language and start programming some PROMS!
Please do be a hardbutt about it now, and always. Lest force the folks to a lurk mode, this linda chit gets to me anyway. Been trying for years to get this type of info out, and there are always a few that try to turn it into a commercial venture. There is more to life then $$, and this is for none commercial stuff
[B]This forum is for education, experiences, learning, and thought sharing. This board is not intended for those who are looking to buy or sell custom PROMs. Please resort to the classifieds, open your own website, or use personal E-Mail. This board was once a private board and now it is public. I would hate for this board to become a private board again due to things such as this (buyers/sellers).
Whew ... not trying to be a hardbutt. Just making sure that everyone understands. Now - get back to that assembly language and start programming some PROMS!
Please do be a hardbutt about it now, and always. Lest force the folks to a lurk mode, this linda chit gets to me anyway. Been trying for years to get this type of info out, and there are always a few that try to turn it into a commercial venture. There is more to life then $$, and this is for none commercial stuff
ttt--with the rash of people lookig to beg for proms to be burnt for them this should be closer to the top.so they can see we are here to learn not to sell.IF THE WANT TO BUY A CHIP LOOK ELSEWHERE---besides not all people are nice,and almost anyone can make a mistake and one BAD prom will burn down your engine.
later
------------------
1990 Trans Am,350 TPI(L98),WS6suspension ,bridgestone RE71's /245/45/zr16
paxton supercharger, alston sfc's,msd 6AL-BTM,
8.5 superconductor wires SLP 1-3/4 headers,duel cats,3"slp exaust, lakewood LCA's,T.B.Bypass
160 degree stat,alum driveshaft,fiberglass wing, secret mods
"if you cant win fair CHEAT"
later
------------------
1990 Trans Am,350 TPI(L98),WS6suspension ,bridgestone RE71's /245/45/zr16
paxton supercharger, alston sfc's,msd 6AL-BTM,
8.5 superconductor wires SLP 1-3/4 headers,duel cats,3"slp exaust, lakewood LCA's,T.B.Bypass
160 degree stat,alum driveshaft,fiberglass wing, secret mods
"if you cant win fair CHEAT"
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
Originally posted by SATURN5:
Hey Grumpy! I'm from Dayton, actually Kettering. Just neat to see a local person on the borad. Bob
Hey Grumpy! I'm from Dayton, actually Kettering. Just neat to see a local person on the borad. Bob
Hopefully this upcoming year will be getting out alot more often.
I don't do any chips (for others), but have been known to look at data logging and make suggestions.
I'm in the sticks, Arcanum, outside Greenville.
Thread Starter
Supreme Member
Joined: Jul 1999
Posts: 2,844
Likes: 4
From: Maryland
Car: 2005 Subaru STI
Engine: 153ci of Turbo Power!
Transmission: 6-Speed
Just bringing this subject back to the top.
Tim
------------------
TRAXION's 1990 IROC-Z
Best Time = 12.244 @ 112.51mph (1.778 60' / 7.819@88.32mph in the 1/8)
All Natural. No Force. No Drugs. Stock Bottom End. Stock Body Panels.
Gunning for NA 11's with bigger cam, bigger stall, and bigger exhaust.
-=ICON Motorsports=-
Moderator: PROM board at thirdgen.org
Program your own PROMs. Read my article on how to do it!
Tim
------------------
TRAXION's 1990 IROC-Z
Best Time = 12.244 @ 112.51mph (1.778 60' / 7.819@88.32mph in the 1/8)
All Natural. No Force. No Drugs. Stock Bottom End. Stock Body Panels.
Gunning for NA 11's with bigger cam, bigger stall, and bigger exhaust.
-=ICON Motorsports=-
Moderator: PROM board at thirdgen.org
Program your own PROMs. Read my article on how to do it!
Member
Joined: Jul 1999
Posts: 317
Likes: 0
From: Chandler, TX
Car: Used to be an '87 IROC
Engine: 5.7l TPI
Transmission: 700R4
Axle/Gears: 3:23?
I am not looking to buy or sell chips. I want to learn how to do this well and benefit from the experience of others. This business of swapping pirated TDF's and such pisses me off just as much as the next guy. I would hate to see this board go private.
Buuuuut, if it were to go private, how does one qualify for membership? I would still like to lurk, at least. I might even be able to contribute a little from time to time.
------------------
'87 IROC 5.7l TPI - original owner!
Buuuuut, if it were to go private, how does one qualify for membership? I would still like to lurk, at least. I might even be able to contribute a little from time to time.
------------------
'87 IROC 5.7l TPI - original owner!
Thread
Thread Starter
Forum
Replies
Last Post
92firebirdchris
Exterior Parts for Sale
0
Aug 14, 2015 11:56 AM
Firechicken86
Engine/Drivetrain/Suspension Parts for Sale
0
Aug 12, 2015 10:07 PM




