gm memcal codes
06-06-2001, 09:26 PM
#1
Senior Member
Thread Starter
Join Date: May 2001
Location: springfield,IL
Posts: 745
Likes: 0
Received 0 Likes
on
0 Posts
Car: T/A / Grand Am
Engine: 383 SBC
Transmission: glide
Axle/Gears: 9" ford 5.67
gm memcal codes
I've been reading posts from the last six months. Where can I find the memcal/ prom codes? I have a few that I want to play with. Some 128s and 256s. I am running a hypertech #3 chip presently, way too rich. Still confused a little on memcals too. I also have a stock 305 auto chip/memcal. I don't realy want to cut it up just yet. Thanks guys.
------------------
87 GTA 355/700r4
ported&polished 083 heads
xe268h comp cam
1 5/8 blackjack alumicote
homebuilt y pipe,pasesetter 3in mandrel cat back.
ported/manifold,upper plentum, tpis maf.
airfoil, 24# svo injectors, hypertech stage 3 chip, underdrive pulleys, erson roller rockers, chromemolley pushrods,2100 stall, shiftkit, 373 10 bolt.
------------------
87 GTA 355/700r4
ported&polished 083 heads
xe268h comp cam
1 5/8 blackjack alumicote
homebuilt y pipe,pasesetter 3in mandrel cat back.
ported/manifold,upper plentum, tpis maf.
airfoil, 24# svo injectors, hypertech stage 3 chip, underdrive pulleys, erson roller rockers, chromemolley pushrods,2100 stall, shiftkit, 373 10 bolt.
06-07-2001, 08:11 AM
#2
Supreme Member
Join Date: Jun 2000
Location: In reality
Posts: 7,554
Likes: 0
Received 1 Like
on
1 Post
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
<font face="Verdana, Arial" size="2">Originally posted by cp87GTA:
I've been reading posts from the last six months. Where can I find the memcal/ prom codes? I have a few that I want to play with. Some 128s and 256s. I am running a hypertech #3 chip presently, way too rich. Still confused a little on memcals too. I also have a stock 305 auto chip/memcal. I don't realy want to cut it up just yet. Thanks guys.
</font>
I've been reading posts from the last six months. Where can I find the memcal/ prom codes? I have a few that I want to play with. Some 128s and 256s. I am running a hypertech #3 chip presently, way too rich. Still confused a little on memcals too. I also have a stock 305 auto chip/memcal. I don't realy want to cut it up just yet. Thanks guys.
</font>
I bought an obsolete one for $20, and use it. Stops at MY 94, but I just do old stuff anyway
Thread
Thread Starter
Forum
Replies
Last Post
