I'm fresh to Proms and have done a search... I am confused on how the injector constant is calculated(165). I want it to reflect my 30# injectors, I have read to simply enter 30 and I have read a formula 10158.8/injector size. My stock chip for 22# is set at .16 single and .031 double. Very low. I appreciate all responses. Thanks!

 

.16 and .031? That sounds to me like you are viewing your bin with the wrong xdf.

What year is the car/ecu?
What bin are you using?
What xdf are you using?
What software are you using?

 

What year is the car/ecu?
1989/ 27c128
What bin are you using?
APYU
What xdf are you using?
6E
What software are you using?
TunerPro RT

I have a custom prom from Ed Wright for the stock injectors and it reads .16 single/ 7.35 double.
After opening ARAP and APYP bins that were in the TunerPro downloaded folder, the numbers are correct 22.XX

What is mask 1D?

 

Sounds like he tweaked the bin so you couldn't edit it easily yourself.

Mask ID = 6E, 32, 8D, 58 etc....
It's basically the name of the template used to edit the various bins.

 

Maybe I have a bad programmer? I have a used Burn1, everytime I read the stock chip most of the data changes. I will program a new chip and reread it and the data changes as well...

 

No idea where you should start except for that ain't right.
Do a separate post on it, or get with Craig.
And don't run any chips till you get it resolved.
It sounds like a communications issue.

 

I see theem now.
didn't know they were used in MAF.