new-need help
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jan 2001
Location: Fresno, CA
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Z28
Engine: LT1
Transmission: T-56
new-need help
Ok i am going to start getting into burning the chips.. what i need to know is if the tech article still has current information.. or if you guys could list what stuff i need and what stuff you use.. thanks guys
#2
Member
Join Date: Apr 2000
Location: The Great White North
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
The tech article is the best procedure to follow. It is current except for that most people are using the atmel 29c256 flash prom. This prom doesn't need a UV eraser, it erases (electrical) automaticaly when you program it. This means you don't need to buy an UV eraser , althoughI would still recomend getting one.
Do a search for 29c256 or flash and you'll see plenty of info to get you going. These will work for the 165 (MAF) cars as well. its all in the archives.
Good luck
Do a search for 29c256 or flash and you'll see plenty of info to get you going. These will work for the 165 (MAF) cars as well. its all in the archives.
Good luck