Tuner Cat Definitions....
Thread Starter
Junior Member
Joined: Oct 2001
Posts: 50
Likes: 0
From: Overland Park, KS
Tuner Cat Definitions....
I bought the software and definition files off of someone... Anyway, I have the program installed and the definition editor installed, but I dont have anything else from him. Any ideas on if Im just missing a definition file or something? I need $8d and the one I show is ecm_42... Same thing?
------------------
90 Red Convertible
100k running great
ZAINO!!!
383 Stroked.... LT4 Hot Cam... Forged Elgen Pistons Scat 9000 Crank Elgen 5.7" rods New Lifters w/ 1.6 Rockers and hardened Pushrods Super Ram Intake Hooker Headers and Y pipe into Gutted Cat with Monza Mufflers (WAY TO LOUD!!) Adj Regulator K&N Shift Kit High stall converter 160 termo, ZR1 Rims.... Red Calipers....Alpine head unit, Kenwood 6x9 4 ways, Polk DX 6 1/2 compnents, MTX 240 amp, Viper 550 alarm,
www.corvetteforum.net/c4/nomar116/
------------------
90 Red Convertible
100k running great
ZAINO!!!
383 Stroked.... LT4 Hot Cam... Forged Elgen Pistons Scat 9000 Crank Elgen 5.7" rods New Lifters w/ 1.6 Rockers and hardened Pushrods Super Ram Intake Hooker Headers and Y pipe into Gutted Cat with Monza Mufflers (WAY TO LOUD!!) Adj Regulator K&N Shift Kit High stall converter 160 termo, ZR1 Rims.... Red Calipers....Alpine head unit, Kenwood 6x9 4 ways, Polk DX 6 1/2 compnents, MTX 240 amp, Viper 550 alarm,
www.corvetteforum.net/c4/nomar116/
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
<font face="Verdana, Arial" size="2">Originally posted by Nomar116:
I bought the software and definition files off of someone... Anyway, I have the program installed and the definition editor installed, but I dont have anything else from him. Any ideas on if Im just missing a definition file or something? I need $8d and the one I show is ecm_42... Same thing?
</font>
I bought the software and definition files off of someone... Anyway, I have the program installed and the definition editor installed, but I dont have anything else from him. Any ideas on if Im just missing a definition file or something? I need $8d and the one I show is ecm_42... Same thing?
</font>
Should have just gone to www.Tundercat.com
Mask 42 is for the 747 ecm, and not at all like a 8D
TGO Supporter
Joined: Jul 1999
Posts: 10,907
Likes: 4
From: The Bone Yard
Car: Death Mobile
Engine: 666 c.i.
Worst, I don't think the "licence" is transferrable entitling you to new TDFs. From TunerCat's perspective, how do they know the other guy is not still using the software? I would have a chat with TunerCat about this to ensure that you are now recognized as the current "registered owner".
With TunerCat, the $42 is "standard" and then you must purchase additional TDFs ($8D) if you need them. Then, if the TDF is updated, you just contact TunerCat to have them e-mail you the most recent version.
TunerCat is very good with the $8D TDF and is probably one of their best defined TDFs.
But do contact TunerCat and try to get yourself changed as the new "registered owner", if they allow "transferring" of software.
With TunerCat, the $42 is "standard" and then you must purchase additional TDFs ($8D) if you need them. Then, if the TDF is updated, you just contact TunerCat to have them e-mail you the most recent version.
TunerCat is very good with the $8D TDF and is probably one of their best defined TDFs.
But do contact TunerCat and try to get yourself changed as the new "registered owner", if they allow "transferring" of software.
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
Oct 8, 2015 08:34 PM
