Where to get a scanning program for laptop??
Thread Starter
Senior Member
iTrader: (3)
Joined: Jul 1999
Posts: 816
Likes: 0
From: Mechanicsburg, PA
Car: '89 Formula 350
Engine: 5.7L L98 TPI
Transmission: 700-R4 Automatic
Axle/Gears: 7.5 disc posi 3.23
Where to get a scanning program for laptop??
Where do I get a scanning program and cable for a laptop. Preferably free program. Please help me with tis I can't afford a scan tool!
Thanx Tom
------------------
89 FORMULA WS6 5.7
Aero Package
Dark Purple Hardtop!
Ram Air II Hood
Z28 Hi-Rise Spoiler
Hypertech Thermomaster
10-BOLT POSI, 3.23 GEARS
700-R4 Automatic
Modified Transmissions
K&N Filter Charger
Modified Mass Air Sensor
Ported & Polished Intake
Accel 8.8 wires and coil
Emissions Delete
Dynomax Exhaust w/Tips
McEwen White Faced Guages
Custom Sound System
(====] [====)
Power buldge hood
^^ FOR SALE ^^
Thanx Tom
------------------
89 FORMULA WS6 5.7
Aero Package
Dark Purple Hardtop!
Ram Air II Hood
Z28 Hi-Rise Spoiler
Hypertech Thermomaster
10-BOLT POSI, 3.23 GEARS
700-R4 Automatic
Modified Transmissions
K&N Filter Charger
Modified Mass Air Sensor
Ported & Polished Intake
Accel 8.8 wires and coil
Emissions Delete
Dynomax Exhaust w/Tips
McEwen White Faced Guages
Custom Sound System
(====] [====)
Power buldge hood
^^ FOR SALE ^^
Senior Member
Joined: Oct 1999
Posts: 6,621
Likes: 2
Car: 91 Red Sled
Axle/Gears: 10bolt Richmond 3.73 Torsen
2 things: Do a simple search for the software and second, shorton the sig up a little. If there is one thing people don't like on this board it's long sigs, trust me, I had one a long time ago and I got heat .
Depending on your ecm there are a few freeware programs but they all require that you build the cable interface. Just do a simple search and you'll find what you want.
.Depending on your ecm there are a few freeware programs but they all require that you build the cable interface. Just do a simple search and you'll find what you want.
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
<font face="Verdana, Arial" size="2">Originally posted by JPrevost:
2 things: Do a simple search for the software and second, shorton the sig up a little. If there is one thing people don't like on this board it's long sigs, trust me, I had one a long time ago and I got heat.
Depending on your ecm there are a few freeware programs but they all require that you build the cable interface. Just do a simple search and you'll find what you want.</font>
2 things: Do a simple search for the software and second, shorton the sig up a little. If there is one thing people don't like on this board it's long sigs, trust me, I had one a long time ago and I got heat
.Depending on your ecm there are a few freeware programs but they all require that you build the cable interface. Just do a simple search and you'll find what you want.</font>
You can't afford not to have scanning software reguardless of the cost. Long term you'll save tons of fuel and lenghten the engine life.
Thread
Thread Starter
Forum
Replies
Last Post