350 auto to 383 t5
Thread Starter
Junior Member
Joined: Aug 2006
Posts: 88
Likes: 0
From: tennessee
Car: 89 iroc z
Engine: tpi
Transmission: 700r4
Axle/Gears: 3.23
350 auto to 383 t5
as the title syas i had a 350 auto now i have a 383 with a 5 spd. What do I have to do to learn how to burn one.
Last edited by Grim Reaper; May 28, 2007 at 07:28 AM.
Joined: May 2004
Posts: 2,262
Likes: 1
From: houston
Car: 83 POS monte carlo 2015 chevy P/U
Engine: 92 5.7 tpi 5.3
Transmission: 700r4 6L60E
Axle/Gears: 2.42 too high
Re: 350 auto to 383 t5
the only way to get one thats truly right is to do it yourself.
so you will need to learn, be prepared, there is a lot to read.
the learning curve is steep, but the rewards are great.
you can start with this, https://www.thirdgen.org/promintro
next you'll want to read the stickies at the top here in DIY-PROM for anything dealing with the ECM & mask your car has. be sure to follow the links.
lastly, buy the equipment needed to do it & enjoy.
so you will need to learn, be prepared, there is a lot to read.
the learning curve is steep, but the rewards are great.
you can start with this, https://www.thirdgen.org/promintro
next you'll want to read the stickies at the top here in DIY-PROM for anything dealing with the ECM & mask your car has. be sure to follow the links.
lastly, buy the equipment needed to do it & enjoy.
Thread
Thread Starter
Forum
Replies
Last Post
Eric-86sc
Engine/Drivetrain/Suspension Parts for Sale
0
Aug 24, 2015 09:01 PM