Having problems with winaldl.----If i log BLM at a certain map, lets say 30, and then save. ---- I then open it up to see what i need to adjust,[BLM] and it will says its at 20 map ???? --What do i do to correct ? - adj within winaldl ?? ----help

 

No idea guys ?????

 

Carl, It has been a while since I used that program but winALDL is a log of current BLM vs RPM/MAP from what i recall. As well as a display of current readings from sensors. I would see say 140 BLM at 2400 rpm/30 MAP. Then I did the calc of adding fuel 140/128 X the fuel value in my lower (1) VE tables and upper table (2). That was done in my editing .bin program(Tunercat). My apologies if winALDL has changed its program to log a specific MAP (ie 30). Please explain further.

 

I don't have my tuning computer with me but... I have to remove a blank space BEFORE and AFTER the forward slash ( / ) on the line that has the MAP values, then the value and the column lines up correctly. If I understand what you are asking.

 

Ill give that a try, ---And i also see mine has a backwards slash.--- ill let you know how i make out.

 

changing that slash in my saved log fixed it.. --- But isnt there a setting so you wouldnt have to change it every time you re log,, and open it back up to check ??? --- Also on main screen of winaldl it has bacwards slash ? seems there should be adjustment

 

Hope theres a setting to my last question