road speed constant
Thread Starter
Member
Joined: Feb 2008
Posts: 176
Likes: 0
From: kentucky
Car: 92 Camaro RS
Engine: 3.4/3500 hybrid
Transmission: 5-speed
Axle/Gears: 3.42
road speed constant
Can you recalibrate your speedometer using the road speed constant, going from 3.42 to 3.73 gears. Or have to change the speedometer gear.
Never mine I believe I found the answer which is no.
Never mine I believe I found the answer which is no.
Last edited by 923.4v6; May 15, 2009 at 08:29 AM.
TGO Supporter
Joined: Jul 1999
Posts: 10,907
Likes: 4
From: The Bone Yard
Car: Death Mobile
Engine: 666 c.i.
Re: road speed constant
For that particular change in gear ratio, you cannot change the speedo display via changes to the eprom (the bit switches work but only on MAJOR changes like using a T56 tranny).
The "Road Constant" changes the "internal speed" within the ECM itself, such as when the ECM is displaying a slightly different speed from your speedo. Your speedo stays the same, but the vehicle speed displayed by the Scan Tool will change with the Road Constant.
The "Road Constant" changes the "internal speed" within the ECM itself, such as when the ECM is displaying a slightly different speed from your speedo. Your speedo stays the same, but the vehicle speed displayed by the Scan Tool will change with the Road Constant.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
0
Sep 2, 2015 07:28 PM
