DIY PROM Do It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.

Getting Back Into This...

Thread Tools
 
Search this Thread
 
Old Mar 22, 2010 | 05:29 PM
  #1  
precision351's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2003
Posts: 22
Likes: 0
Getting Back Into This...

Hello everyone. About six years ago i put my car on hold as life got in the way. Back then I did some tuning with the 730 AUJP and barely touched on the 749 BBZB. I am at a point where I'd like to get back into things but now that I do some research i see things like the $59 and $60 and even a boosted $8D that I'm not sure which way to go. I would greatly appreciate it if anyone could just take a look at my setup and point me in the direction that I need to be heading. If anyone has a starting bin close to my setup, that would be all the more helpful. I'm not asking for anyone to create anything for me, just looking for the best avenue to travel since you all have much more experience than I do. I do have all of the necessary components for burning new EPROM's. I will need to get a WB O2 sensor (this was a fairly item when I hung it up). Thank you in advance for your help!

My Setup:
L98 350cid- forged internals
10:1 CR (I know it's a little high for boost but it was there before the supercharger)
Dart Iron Eagle 200cc/64cc heads
LT1 Intake (willing to change if anyone has a better suggestion)
Procharger F-1 12psi
Cam= .489I/.489E, 218I/224E @.050 112 LSA
42lb high impedance injectors

If there is anything missing let me know.
Reply
Old Mar 22, 2010 | 08:41 PM
  #2  
Saar's Avatar
Senior Member
 
Joined: Nov 2006
Posts: 672
Likes: 1
From: Camden, MI
Car: 1985 IROC-Z28
Engine: LB9
Transmission: 700R4
Axle/Gears: 3.73
Re: Getting Back Into This...

$60? i've been in this for at least a year, but haven't heard of a $60 mask... or at least i don't think i have. $59 is proving to be very useful though.
Reply
Old Mar 22, 2010 | 11:24 PM
  #3  
precision351's Avatar
Thread Starter
Junior Member
 
Joined: Jan 2003
Posts: 22
Likes: 0
Re: Getting Back Into This...

I though for sure that I had read about the 60 mask but I could be mistaken.

So I assume that the $59 is a better version of the $58? What are some of the differnces? I also assume that the $59 is for the 749 and not the 730? If that's the case, what is a good base bin for the $59?
Reply
Old Mar 23, 2010 | 01:46 AM
  #4  
DENN_SHAH's Avatar
Supreme Member
20 Year Member
iTrader: (1)
 
Joined: May 2004
Posts: 2,262
Likes: 1
From: houston
Car: 83 POS monte carlo 2015 chevy P/U
Engine: 92 5.7 tpi 5.3
Transmission: 700r4 6L60E
Axle/Gears: 2.42 too high
Re: Getting Back Into This...

you may want to check out http://code59.org/
there is tons of info over there for a boosted 7730
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Fronzizzle
Suspension and Chassis
6
Mar 18, 2019 08:29 PM
db057
Tech / General Engine
4
Aug 22, 2015 08:17 PM
IroczFan
Carburetors
1
Aug 18, 2015 05:19 AM
bbsr72
Brakes
0
Aug 12, 2015 10:44 AM
Thaney9
Electronics
3
Aug 7, 2015 08:25 PM




All times are GMT -5. The time now is 04:49 AM.