Hi Everyone I am here humbly seeking knowledge. I have read through the posts here and am gaining insight but still not 100% on what I need. I am currently building a 1987 Trans am. It has a new rebuilt 350 motor out of a 91 camaro and a new rebuilt T-5 out of an 87 Camaro. Miraculasly it all went in the car without much trouble. I have purchased a speed density harness and have thought of going with a 1227730 ECM to match it. Now as far as the chip what do you gentlemen recommend I do to save some cash and still have tunability.

 

Depending on your motor you might try the AXCN file. It's from a TPI vette (350) with a manual tranny. It would at least be a good base to start from.

 

www.dynamicefi.com
EBL P4 Flash

I got it for my 91 305 TPI... tunes, modifies, monitors, all 1 cable... has 8 banks of on board flash memory, you just click on the bank you want to run and it's running that tune..
Has ton's of features...

Only drawback to some people, it gets mounted in your car's computer, so you can't tune other cars with it, not a problem for me...

Rafael

 

Thanks for the link and the suggestions they look very promising. They should help me resurect this old bird and save one more from the scrap yard.

 

As you know there's no prom begging here, it's for the DIY guy.

With that said and encouragment from Mark at TunerPro a bunch of grear heads got togwether and put together a great starter collection of stock chip to choose from and download. HTH!
http://www.eagle-mark.com/Forums/