Hi guys, how do you measure engine load in Tuner Pro? Can it be done using the dash display? I want to modify a Fuel/Air Vs. Load table and I would like to be able to see load values, or maybe at least know how to calculate them? Thank you! 
LV8 represents gm/cyl and can be approximated by: MAF (gm/sec)/rpm * 4800 (limited to 255) neglecting filtering effects.
Senior Member
LV8 isn't transmitted over the datastream?
also, i'm fairly certain most/all masks that use MAF/LV8 have a global LV8 scalar that will skew the value up or down. since LV8 essentially acts as a "airmass in cylinder" value(much like OBD2 grams/cyl), you end up with something that allows for choosing your own range/resolution for anything that depends upon LV8 for reference.
also, i'm fairly certain most/all masks that use MAF/LV8 have a global LV8 scalar that will skew the value up or down. since LV8 essentially acts as a "airmass in cylinder" value(much like OBD2 grams/cyl), you end up with something that allows for choosing your own range/resolution for anything that depends upon LV8 for reference.