Okay so next week I am finally ganna get my car on the dyno and though I have had everything hooked up and running for quiet awhile the guy that is ganna be doing the tuning would "Really like" the o2 to be readable on the tuning software making data logging and tuning easier/faster I know the LC=2 comes with a serial connector for this purpose but my lap top doesn't have a serial port and how would I go about making it view able in the software any help would be apricated

 

Easiest would be to get a USB to Serial adapter cable and connect the LC2 to your laptop. Then use the Innovate software to display the AFR reading.

RBob.

 

Depends on the hardware too doesn't it? I was reading up on the Autoprom I have coming (Tomorrow! So excited lol). You are supposed to be able to set it up for one of the Innovate LC2 analog outputs and make it log directly to TunerPro with the rest of the datalogging you're doing. *Edit* (Sorry, I realized now this post is 20+ days old but I guess I was replying also to make sure I understood correctly as well.)

 

Yeah that's nice and easy feature with APU1. I have one myself with LC-2 hooked to it. Gearhead EFI forum has a really nice thread on setting up ADX file for it. Not difficult just time consuming. Also look into downloading logworks software from innovate so you can hook up straight to the wideband also. I say so bc mine is .5 afr off between log works and apu1, others have had this problem also bc voltage offsets. Not a huge problem but log works is right and once you know how far off it makes it real simple bc apu1 puts it in datastream. Just my 2 cents.

 

Cool, thanks. That's good to go. I have lurked on that forum just reading for a bit now, I think I will probably be making an account for it here real soon.