Does anybdy still use TunerCat?
Thread Starter
Member
Joined: Apr 2008
Posts: 371
Likes: 2
From: Chicago, IL
Car: 1987 IROC Z28
Engine: 305 TPI
Transmission: TKO 600
Axle/Gears: 3.45 (G92 package)
Does anybdy still use TunerCat?
And if so... has anyone found that this connects to the '165 ECM better than tunerpro RT v5?
Joined: Jul 1999
Posts: 12,089
Likes: 125
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Joined: Dec 2004
Posts: 16,751
Likes: 995
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Does anybdy still use TunerCat?
I know your were getting bogus info with tp like emi or something.
Have you tried winaldl or tts datamaster might still be out on the net.
Winaldl seems to connect to the 165 easily but sometimes drops after the 10k is removed. Don't leave it in the 10k mode and drive pinging can occur. I. Eli eve the timing gets locked and rpm adder is active during this mode.
Have you tried winaldl or tts datamaster might still be out on the net.
Winaldl seems to connect to the 165 easily but sometimes drops after the 10k is removed. Don't leave it in the 10k mode and drive pinging can occur. I. Eli eve the timing gets locked and rpm adder is active during this mode.