Gauge lights don't work after alarm install
Gauge lights don't work after alarm install
The monkeys killed my gauge lights. Of course, this is after they tore my clutch apart trying to park in a garage. The guy that tried to steal my car did less damage, and didn't charge me for it. Where does the lead for the gauge lights start, and where should it finish? Thanks! 89 bird 5'spd zz4 black/gray and radio-less.
Supreme Member
Joined: Jul 1999
Posts: 1,335
Likes: 2
From: Tucson, AZ, USA
Car: '92 Z28; Dk Teal; Her Pkg
Engine: 305
Transmission: Richmond 6 Spd
Axle/Gears: Moser 9", Detroit Locker, 3.70
Here's the schematic for an '85 Camaro - should be close to the same:
<IMG SRC = "http://www.geocities.com/vtcamaro/Pictures/wiring-diagrams/pg198.jpg">
Tim
<IMG SRC = "http://www.geocities.com/vtcamaro/Pictures/wiring-diagrams/pg198.jpg">
Tim
Supreme Member
Joined: Jul 1999
Posts: 1,335
Likes: 2
From: Tucson, AZ, USA
Car: '92 Z28; Dk Teal; Her Pkg
Engine: 305
Transmission: Richmond 6 Spd
Axle/Gears: Moser 9", Detroit Locker, 3.70
Here's the link to the schematics for an '85 Camaro:
http://www.geocities.com/vtcamaro/Wire-Diagrams.html
Geocities, however, does not seem to be consistantly reliable for access, though.]
Basically, the dash lights are powered from the light switch dimmer rheostat & fused through the INST LPS fuse.
Tim
[This message has been edited by Tim Burgess (edited March 06, 2001).]
http://www.geocities.com/vtcamaro/Wire-Diagrams.html
Geocities, however, does not seem to be consistantly reliable for access, though.]
Basically, the dash lights are powered from the light switch dimmer rheostat & fused through the INST LPS fuse.
Tim
[This message has been edited by Tim Burgess (edited March 06, 2001).]
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
16
Jul 5, 2024 11:18 PM





