i am looking for a ESCM?

 

I know what an ECm is but not an ESCM. You may try searching the classified on this site

https://www.thirdgen.org/classifieds

------------------[*]my Formula Homepage [*]Collision P/Ns & Diagrams

"I don't know the key to success, but the key to failure is to try to please everyone."

 

Its called Electronic Spark Control Module its located some where on the passager firewall i am not sure.I am doing a TPI swap and i was told i would need a 350 ESCM.I am not sure what it is either.

 

I'm pretty sure the guy meant to say ECM. Electronic Control Module. I see them on eBay all the time. The part numbers differ for the different TPI systems. I am not sure what the number is for the MAF TPI (??-1989), but the ECM part number you want for a Speed Density System (1990-92) is 1227730. I have read that the ECM in the V6's is the same as the ones from the V8 Speed Density TPI's, so you might try a junkyard in your area to find one. The only problem with a V6 ECM is that you will have to either get a 350 TPI chip, or burn one yourself, which is probably your best bet. See the DIY-EFI board for more info on burning chips.

 

No.... he ment ESCM. Its a little yellow box behind the dash board (has AC printed all over it), and its calle the Electro Spark Contol Module. It basically reads the detonator sensor, and puts out-put to the ECM. the wires going into it are pink/black, and coming out of it are wht(to the detonation sensor), brn (to ground) and black (to ecm). I have one for a 305 that i'm planning on swapping into a car, and don't have one to spare, but i wanted to clear up the matter that he's not looking for an ECM (Electronic Control Module).

Just a bit of intersting info.


Joker