hi, i have an 84 Z28 that i put a 350 in, and the only wires connected to it are temp, oil pressure, and the alternator wires, i was wondering if it would be ok to CUT all of the other wires that arent connected to anything, they are just an ugly mess, i also dont have A/C anymore so im wondering if much of that went to it, it would clean up my engine bay if i didnt have to keep them in there for some reason, cause rightnow it doesnt seem like they are doing anything. thanks

 

i need more detail. is it carberated or fuelie tpi or tbi, what accesories or components do you have in the engine compartment. even if its carb you should have wires going to the carb.

 

uh, its carb, and its all aftermarket, thats what i mean nothing is hooked up except the sending units, so i dont think i need all that other crap that used to go to the old Qjet, and the AC crap, i have a edelbrock performer carb with manual choke so theres no wires for that.

 

Happy cutting. Just make sure you don't chop your headlight wiring off too.