I recentley installed a 99 ls1 in my 85 Iroc. When ever i try and pop my hatch the engine will cranck. The only wires I used from the existing harness were the 2red that go into one eye that went to the starter. I hooked these up to the ls1 starter. The other was the purple that goes to the switch I ran this one to the ls1 harness. I checked in my camaro book and could not find any wiring diagrams for the hatch. Any one out their have these diagrams or might now whats going on here. Any help would be appreciated. Thanks

 

Go to the Thirdgen.org main page and then to the Tech Articles page. In the Electronics section there is a link to any wiring diagram you can possibly need.