Last try on 4th gen gauge cluster wiring
Thread Starter
Junior Member
Joined: Jun 2001
Posts: 39
Likes: 0
From: San Antonio, TX
Last try on 4th gen gauge cluster wiring
Here's the gauge connector I pulled of a 98 Camaro.
A1 empty
A2 empty
A3 red
A4 empty
A5 tan w/ white stripe
A6 empty
A7 empty
A8 brown w/ white stripe
A9 empty
A10 orange
A11 empty
A12 lite blue w/ white stripe
A13 purple w/ white stripe
A14 empty
A15 empty
A16 empty
A17 lite green
B1 brown
B2 empty
B3 grey
B4 empty
B5 purple w/ white stripe
B6 grey
B7 orange w/ black stripe
B8 green w/ white stripe
B9 grey
B10 blue w/ white stripe
B11 black
B12 empty
B13 empty
B14 tan
B15 black
B16 empty
B17 empty
This it it. All the wires I have. If ANYONE who has done the dash swap has seen this config. please help me out.
A1 empty
A2 empty
A3 red
A4 empty
A5 tan w/ white stripe
A6 empty
A7 empty
A8 brown w/ white stripe
A9 empty
A10 orange
A11 empty
A12 lite blue w/ white stripe
A13 purple w/ white stripe
A14 empty
A15 empty
A16 empty
A17 lite green
B1 brown
B2 empty
B3 grey
B4 empty
B5 purple w/ white stripe
B6 grey
B7 orange w/ black stripe
B8 green w/ white stripe
B9 grey
B10 blue w/ white stripe
B11 black
B12 empty
B13 empty
B14 tan
B15 black
B16 empty
B17 empty
This it it. All the wires I have. If ANYONE who has done the dash swap has seen this config. please help me out.
Senior Member
Joined: Jul 1999
Posts: 700
Likes: 0
From: Pineville, NC US
Car: An '87 Italian Retard Out Cruisin'
Engine: LS1 install in progress
Transmission: 4L60e
Axle/Gears: 9 bolt
Have you tryed camaroz28.com or any other 4th gen board yet? They hopefully can help you there.
Thread
Thread Starter
Forum
Replies
Last Post
