Please help with keyless
08-18-2004, 11:24 PM
#1
Junior Member
Thread Starter
Join Date: May 2004
Location: Arizona
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc-Z Camaro
Engine: 5.7 liter 350
Please help with keyless
Alright, I got this http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWN:IT "RATTLER 369D REMOTE START KEYLESS ENTRY & INSTALL KIT" a lil while back and now I'm finally getting around to thinking about installing it.
All I really want is the keyless entry, nothing else. I am wondering how exactly it works...hitting either of the lock buttons will lock both, so I assume it should be pretty simple but I want to do it right.
Where would be the best place to get the 12v constant battery connection for the devices power, and where is the best place to connect it to a wire that sends the signal to the actuators? I also need to mount the reciever somewhere, but I'll figure that out easily.
Any help from ppl who have done this would be GREATLY appreciated.
All I really want is the keyless entry, nothing else. I am wondering how exactly it works...hitting either of the lock buttons will lock both, so I assume it should be pretty simple but I want to do it right.
Where would be the best place to get the 12v constant battery connection for the devices power, and where is the best place to connect it to a wire that sends the signal to the actuators? I also need to mount the reciever somewhere, but I'll figure that out easily.
Any help from ppl who have done this would be GREATLY appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
S92RS
Electronics
3
11-06-2000 11:05 PM
