I think i posted this wrong first, but here goes..


I just rebuild my engine and now it wount start.
I can crank it, but it dont start.
I got fuelpressure at the fuel rail.
The fuelpump goes on for about 2 sec when I turn on the ignition.
I measured at the pink wire at the coil, it got 12v when i turn the ignition on. But no spark when I crank it.
Its hard to hear, but I dont think the fuelpump starts when I crank it.
I double checked all wiring.
Is there some fusable links or "hidden" fuses that I missed?

I also put a sparkplug direkt from the coil and grounded it to se if I get spark, nothing.

Im thinking bad coil or dead ECM.
If the pickup coil is dead, wount I get spark from the "main" coil?
And if the DIST module is broken wount I still get a spark?
Any tips on how to proceed?