I need help! I have an 85 ta, and would like to swap an 86 cluster from my crashed ta. My problem is that I don't Know which wires need to be moved around to accomodate the different gauge positions. I've seen the diagrams on the speedo side of the swap, but none on the two gauges that are moved in the newer dash. I've read there are wires that must be moved in the connector for proper operation. so, I was wondering if anyone could help me figure this out. thanks

 

This may or may not be what you need:

http://www.hioutput.com/tech/speedo.html

JamesC

 

I already saw this. It is very helpful for the speedo side of things, but lacks on the rest of the swap. thanks anyway.