Wires burned after TPI swap...Now what?
Thread Starter
Junior Member
Joined: Aug 2008
Posts: 26
Likes: 0
Wires burned after TPI swap...Now what?
89 Camaro Irocz - BODY
Originally 89 TBI now 305 TPI from another 89 car
89 TPI 350 ECM with matching 89 350 TPI wiring harness
Just finished swapping in a complete 305 TPI motor from intake to pan into my car. Car took a long time to start but it eventually started. Ran for about 2 minutes then cut off. I noticed 2 red wires that were burnt near the dash. Now the car has power but when key is in and turned the ignition and dash is completely dead. Does anyone know what I can do to fix this.
Originally 89 TBI now 305 TPI from another 89 car
89 TPI 350 ECM with matching 89 350 TPI wiring harness
Just finished swapping in a complete 305 TPI motor from intake to pan into my car. Car took a long time to start but it eventually started. Ran for about 2 minutes then cut off. I noticed 2 red wires that were burnt near the dash. Now the car has power but when key is in and turned the ignition and dash is completely dead. Does anyone know what I can do to fix this.
Thread
Thread Starter
Forum
Replies
Last Post
eightsixseven
Tech / General Engine
2
Dec 16, 2024 01:50 PM
Sanjay
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 12, 2015 03:41 PM