Ok well I've had my car in storage for a few yrs and went to get it out. It started up fine once I put in the new battery. It was running really rough but worked. I towed it closer to home and it started up again running rough. So I disconnected the temp sensor and low and behold the car ran like a top. So I figured I needed a new temp sensor and was good to go. Left the car overnight and came back and car would not start at all. I decided to change the spark plugs and then tried starting it up again but I have no spark and probably didn't the first time after sitting for the night.

I then replaced the distributor cap and rotor and also the coil but to no avail I have no spark. Any suggestions as to what might cause it to have no spark. I'm thinking a corroded wire or starter wire or maybe computer???? Any input would be appreciated.

Thanks

 

Maybe the ignition control module.

 

nope just put in another last night still no spark

 

 

found the problem the distributor itself was bad. THanks for all the help.