Power locks problem.
Thread Starter
Senior Member
Joined: Feb 2010
Posts: 695
Likes: 11
From: Oregon
Car: 1991 Z28
Engine: L31-R 350 w/ EBL P4
Transmission: 700R4
Axle/Gears: 2.73
Power locks problem.
I have a 1991 Z28 Camaro with power locks. Today I took my friend and I to Mcdonalds for lunch. The power locks worked fine while we were there. When we were leaving I unlocked the doors the with power locks. Then I drove about a mile to my school and parked. When I tried to lock the doors, nothing happened when I hit the button. I tried the lock and unlock buttons on both sides, and nothing worked.
I'm now home and they still do not work. I really have no clue as to why this happened. My friend was pulling the handle a lot when it was still locked so maybe that did it? I really don't know. Windows still work as far as I know.
I'm now home and they still do not work. I really have no clue as to why this happened. My friend was pulling the handle a lot when it was still locked so maybe that did it? I really don't know. Windows still work as far as I know.
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Locked Thread
Make sure the ACC fuse is good.
If it is, make sure the PWR ACC circuit breaker is good.
If it is, gain access to the lock relay located behind the left shroud.
Can you hear it ♦click♦ when you press the door lock button?
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
I Dont Mind Wreckin On The Track, No Paperwork To Fill Out
.
If it is, make sure the PWR ACC circuit breaker is good.
If it is, gain access to the lock relay located behind the left shroud.
Can you hear it ♦click♦ when you press the door lock button?
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
I Dont Mind Wreckin On The Track, No Paperwork To Fill Out
.
Thread
Thread Starter
Forum
Replies
Last Post
sailtexas186548
Problems / Help / Suggestions / Comments
2
Aug 24, 2015 10:11 PM
