no fuel pump operation after lb9 engine harness swap
Thread Starter
Member
iTrader: (4)
Joined: Aug 2009
Posts: 160
Likes: 1
From: Underhill,vt
Car: 98 camaro ss, 98 grand cherokee 5sp
Engine: 5.7 ls1, 4.0 sixxer
Transmission: T56, ax15 swapped
Axle/Gears: 3.42, 3.73
no fuel pump operation after lb9 engine harness swap
the fuel pump checks out okay, the green wire from ecm is putting out a signal, I have 12 volts at orange power wire, good ground. Wondering if thec207 connector or c100 connector has fuel pump wiring, all suggestions of c100 views show no fuel pump wiring, If anyone knows where the tan/white(gray) fuel pump fed wire is routed throughout body, please let me know as Im using only the computer and engine harness wiring from a v8. If i jump a wire from the fuel pumps tan/white(gray) at pump connector, to white tan (greay at relay, i get a constant fuel pump power with KOEO, pump will constantly run, any help is appreciated
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
See C Señor
The gray wire from the relay goes thru C100.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
8 Wheels Corner Better Than 4, If You’re On The Outside You Have Fair Warning
.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
8 Wheels Corner Better Than 4, If You’re On The Outside You Have Fair Warning
.
Thread
Thread Starter
Forum
Replies
Last Post
9192camaro
Engine/Drivetrain/Suspension Parts for Sale
16
Feb 3, 2019 12:21 AM
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM





