Remote Start/ Keyless install help

Reply Subscribe

Thread Tools

Search this Thread

Sep 8, 2010 | 09:33 PM

theNMBR27

Thread Starter

Senior Member

Joined: Sep 2009

Posts: 516

Likes: 1

From: Downers Grove, IL

Car: 91 Z28 / 04 GTO

Engine: GMPP 350 TPI / LS1

Transmission: WC T5 / T56

Axle/Gears: 3.23 / 3.46

Remote Start/ Keyless install help

I got an extremely great deal on a brand new BOA 265b remote start keyless entry kit, but I can figure out how to wire it for the door locks. The manual gives me 8 types of locks and I couldn't find anything on google for the kit. What color wires am I looking for? Any help is appreciated, sorry for the long read.

Sep 9, 2010 | 12:15 PM

camaronewbie

Supreme Member

Joined: Sep 2002

Posts: 9,192

Likes: 19

From: Cary, North Carolina

Car: 1992 RS

Engine: Carbed 350

Transmission: 700R4

Axle/Gears: 3.42 posi

Re: Remote Start/ Keyless install help

wiring diags here: http://www.austinthirdgen.org/index.php?pid=19

Also, starter circuit diagnose here: http://www.austinthirdgen.org/index.php?pid=38

Sep 9, 2010 | 01:00 PM

NINÅ

Supreme Member

Joined: Jan 2006

Posts: 3,341

Likes: 10

From: Mooresville NC

Car: LOWERED ♦ CRIMSON METALFLAKE

Engine: ► 400 KUBES ◄

Transmission: 765R4

Axle/Gears: EATON POSI 4.56

Locked Thread

There are three wires for the locks.

Green/black for locking, blue/black for unlocking, purple/black for polarity orientation.

Connect the purple/black wire to constant 12 volts thru a 15 amp fuse (you can use the 12 volt line at the doorlock switch).

That key fob might have delay in the doorlock button(s), you might have to press & hold for a full second to actuate.

◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙

Make Noise, Turn Left, Repeat

.