ignition switch trouble...suggestions, tips?
Thread Starter
Junior Member
Joined: Nov 2010
Posts: 13
Likes: 0
From: austin tx
Car: 1991 L98 z28 camaro
Engine: 5.7 TPI 350 (GM stock replacement)
Transmission: 700r4
Axle/Gears: 3:73
ignition switch trouble...suggestions, tips?
ignition switch won't return to the off position....its on and has a 1/4 turn before it bumps the starter...so what my question is....how do i get it to come back? and how do i get the column components off with out breaking them? i imagine they all have to come off in the direction of the steering wheel right?...anyways...any help would be greatly appreciated...thanks dude's
TGO Supporter
Joined: Sep 2000
Posts: 6,775
Likes: 27
From: So.west IN
Car: 87 Formula/ 00 Xtreme
Engine: TPI 305/ v6
Transmission: struggling t-5/ 4l60E
Axle/Gears: 3.08/ 3.23
Re: ignition switch trouble...suggestions, tips?
When I had that happen to my old '84, it was the auto shifter lockout on the ignition switch that failed. My car was actually stuck to the point you couldn't turn it off while it was running.
Replacing the ignition switch fixed the problem on my 84.
https://www.thirdgen.org/forums/atta...on-f_relay.jpg
The red arrow is pointing to the high/low lamp switch, the ignition switch is opposite of that on the column, under the dash.
Replacing the ignition switch fixed the problem on my 84.
https://www.thirdgen.org/forums/atta...on-f_relay.jpg
The red arrow is pointing to the high/low lamp switch, the ignition switch is opposite of that on the column, under the dash.
Last edited by deadbird; Nov 28, 2010 at 09:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
