try painless wiring?

www.mouser.com

Ive found everything but the C100/C207/C221

Various sellers offer wire. You want TXL jacket for whatever size you need. 3rd gen minimum is 18ga, max is 10ga. Anything in the vicinity of fuel requires teflon coating IE TBI injectors/in tank pump wiring

I have a spare c100, and computer/engine harness side c207, and a bit of extra of weatherpack connectors. my c100 is missing some pinouts as i need them, if your interested

www.larryselectricsite.com sells connectors

They have the common connectors universal to TPI/LTx/LSx engines. No Fbody specific body connectors

Get me a part number for the connectors and i will see what i can do. I work for a company that makes and repairs automotive wiring harnesses.

Would if I could. Ive been hunting the info for a long time

See if the PN listed in this is valid
https://www.thirdgen.org/forums/elec...ctor-info.html

Might find it by association

In all the JY cars Ive snooped, Ive never found another body connector like whats in 3rd gens

I think i may have found it.

Go to Delphi site. http://connectors.delphi.com/dcsgdmcs/homepage.aspx

type in part number 12015509 or 15492519 (25 Way Black Metri-Pack 280 480 630 Unsealed Male Connector Assembly)

and 12020629 (17 Way Black Metri-Pack 280 480 Unsealed Male Connector)

and 15492518 (42 Way Black Metri-Pack 280 480 630 Unsealed Female Connector Assembly)

If these are what you are after i will see if i can get some on order.

You the man!

15492519 is a good PN. Check the PDF drawing, right on
http://connectors.delphi.com/DCSGDMC...rtNum=15492519

Cant locate the rest or the C100 cover, but the engine side C100 is plenty useful. Only $3.25 each too

I will get some on order for the future. If anyone needs them now you can get them from mouser. Or PM and i will let you know when i get some in.

very interesting, good to see we can start with a fresh wiring setup instead of cutting up the factory harness. my setup's way too far ahead to make use now, but maybe next time i can tuck away the factory harness for future safe keeping

Nice info... keep it coming

I now have c100 connectors, and terminals if anyone is interested. I Also have access to most other connectors for thirdgens, just shoot me a part number.

did you find which c100 partnumber fit a 90 -92?

These should be good part numbers and will fit the 92 f body

that makes me happy great research.... now if i could only find a good place online for some factory colored txl wire....

What colors and sizes do you need?

some orange green/white gray pink 18ga red 10ga just what i can think of

i hate splicing power wires together i would rather repin and pay alittle extra then have trouble down the line

PM me with the lengths and i will get you some prices, and my work email.

BradRS, I am interested in taking a PSI Conversion standalone harness (HAR 1012) and instead of cutting my under dash wiring to hook up the 5 or so wires it needs I'd like to get a C100 and have the pins wired where needed. Would you be interested in doing this? I'd be happy to pay ya, if it makes the harness plug and play and I don't have to cut up my old harness, etc...

Adding to an old post...
C100
Interior Side - 15492518
Lock B - 12015511
Lock C - 12015510

Engine side connectors
25 Pin - 15492519
17 Pin - 12020629
Pin locks are the same as above
25 Pin stabilizer - 12162412
17 Pin stabilizer - 12162413

Unsealed pin part numbers

Pins, 280 Male;
12084586 5.0-3.0 Tin Brass Tin
12129498 3.0-2.0 Tin Brass Tin
12020116 1.0 Tin Brass Tin
12034047 0.80-0.50 Tin Brass Tin
12066271 0.50-0.35 Tin Brass Tin
12020782 0.35 (2 Req’d.) Tin Brass Tin

Pins, 480 Male;
12033820 5.0-3.0 Tin Brass Tin over Copper
12052827 3.0 Tin Brass Tin over Copper
12020120 2.0-1.0 Tin Brass Tin over Copper
12020119 0.80-0.50 Tin Brass Tin over Copper
12066269 0.50-0.35 Tin Brass Tin over Copper
12020784 0.35 (2 Req’d.) Tin Brass Tin over Copper

Pins, 630 Male;
12066493 5.0-3.0 Tin Brass Tin over Copper
12052826 3.0 Tin Brass Tin over Copper
12020365 3.0 (2 Req’d.) Tin Brass Tin over Copper
12020126 2.0-1.0 Tin Brass Tin over Copper
12020125 0.80-0.50 Tin Brass Tin over Copper
12033972 0.80-0.50 (2 Req’d.) Tin Brass Tin over Copper
12066454 0.50-0.35 Tin Brass Tin over Copper

Pins, 280 Female;
12015858 5.0-3.0 Tin Brass Tin
12129494 3.0-2.0 Tin Brass Tin
12034046 0.80-0.50 Tin Brass Tin
12052217 0.50-0.35 Tin Brass Tin
12162597* 3.0-2.0 Tin Brass Tin
12162595* 1.0-0.80 Tin Brass Tin
12162596* 0.50-0.35 Tin Brass Tin

Pins, 480 Female;
12084595 5.0-3.0 Tin Brass Tin
12052221 3.0 Tin Brass Tin
12124304 2.0-1.0 Tin Brass Tin
12015860 0.80-0.50 Tin Brass Tin
12052219 0.50-0.35 Tin Brass Tin
12020366 2.0-1.0 (1 Req’d.) Tin Brass Tin

Pins, 630 Female;
12084590 5.0-3.0 Tin Brass Tin
12052224 3.0 Tin Brass Tin
12084596 5.0-3.0 (2 Req’d.) Tin Brass Tin
12015870 2.0-1.0 Tin Brass Tin
12015869 0.80-0.50 Tin Brass Tin
12020035 0.80-0.50 (2 Req’d.) Tin Brass Tin
12052222 0.50-0.35 Tin Brass Tin

Nice info. Any chance you found the covers for the engine side C100 connectors? I couldnt even find discontinued PNs

All of the information was in a PDF off of - http://www.powerandsignal.com/
One would think that I could go back and find it relatively easy... nope. I know I downloaded the PDF at home. I will look tonight in my downloads folder I'm thinking it's still in there or in my good info folder within my 1986 Camaro folder.