head light motor
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Houdini Can Handle Any Harness
I have no way of knowing if your replacement harness is correct however power for the light doors comes from the headlight switch brown wire, and the yellow wire.
From there it goes to the door module located in a bracket on the left side of the firewall.
The headlight module is a rectangular unit about 3" x 4".
When you have the headlight switch in the ON position power is supposed to be applied to the aforementioned wires which go to the module.
The module is then supposed to apply power to the door motors VIA the wires coming out of the module at terminals 2A thru 2D.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
I Hit The Water Barrels Because My Car Was Dirty
.
From there it goes to the door module located in a bracket on the left side of the firewall.
The headlight module is a rectangular unit about 3" x 4".
When you have the headlight switch in the ON position power is supposed to be applied to the aforementioned wires which go to the module.
The module is then supposed to apply power to the door motors VIA the wires coming out of the module at terminals 2A thru 2D.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
I Hit The Water Barrels Because My Car Was Dirty
.
Thread
Thread Starter
Forum
Replies
Last Post