ICM keep going bad..
Thread Starter
Junior Member
Joined: May 2010
Posts: 36
Likes: 0
Car: 89 IROC-Z 5.7
Engine: 5.7 TPI
Transmission: A/T
ICM keep going bad..
OK after hunting and putting out money i THINK i might have found my problem... Car has hard start no power and no start when it gets hot... changed ICM..NO START.. checked for spark. NO spark so i got new ICM still no start but some time after trying for hours it started and it would start every time on the first turn so i took it out for a ride and it was really fast.. after i parked it i tried to start it again and no start.. i took two ICM to auto zone to get tested and both are bad... Whats making ICM go bad????
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Icky ICM
In many cases: the coil.
Replace the coil and ICM before firing it up.
Don’t start the engine with the new ICM with the old coil.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Maybe I Should Have The Guys Put A Door In The Bottom For Any Roll-Overs In 2012
.
Replace the coil and ICM before firing it up.
Don’t start the engine with the new ICM with the old coil.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Maybe I Should Have The Guys Put A Door In The Bottom For Any Roll-Overs In 2012
.
Thread
Thread Starter
Forum
Replies
Last Post
RedLeader289
Tech / General Engine
10
May 28, 2019 01:47 PM
