What wires need to be connected to keep all interior functions?
#1
Junior Member
Thread Starter
Join Date: Nov 2003
Location: Newport, NC
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
Car: 09 Honda Fit / 91 Camaro RS
What wires need to be connected to keep all interior functions?
91 Camaro RS 305 TBI. Harness is being pulled to swap to a carbed 283 SBC.
Nothing cut.
I need to know what connections are needed to underhood to keep all
functions inside the vehicle. Car is a base with not p/w/l/seats.
Looking at the diagram it looks like the brown wire going into the fuse box supplies all the power to the inside.....so if I supply 12v to that I should be good?
Nothing cut.
I need to know what connections are needed to underhood to keep all
functions inside the vehicle. Car is a base with not p/w/l/seats.
Looking at the diagram it looks like the brown wire going into the fuse box supplies all the power to the inside.....so if I supply 12v to that I should be good?
#2
Supreme Member
iTrader: (35)
Join Date: Aug 2006
Location: Mississauga,Ont,Canada
Posts: 1,470
Likes: 0
Received 1 Like
on
1 Post
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: What wires need to be connected to keep all interior functions?
In thery yes it should work but the wire you have to keep live is on the harness you are taking out as both sides ( driver firewall and passenger fender area ) are connected im sure of it
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
03-08-2019 12:21 PM