racecar wiring harness
Thread Starter
Junior Member
Joined: Jan 2014
Posts: 5
Likes: 0
From: lewiston idaho
Car: 1984 firebird and a s10
Engine: 406 and a357
Transmission: 400 turbo and a 350 turbo
Axle/Gears: 4.11 and 4.56
racecar wiring harness
I have a 84 firebird that is a dragracecar and want to rewire it with a 8 ciruit harness.does anyone have a diagram for this or some advice on this.just your basic racecar,fuel pump, altenator, fan,starter,waterpump,and tail light,ignition system 6al and billet distributor
Joined: Apr 2005
Posts: 7,736
Likes: 14
From: Not in Kansas anymore
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: racecar wiring harness
Most aftermarket harnesses come with the tails labelled
You just run each wire to its spot , mount your pump and fan relays and connect the feed to the battery.
As basic as you can get
You just run each wire to its spot , mount your pump and fan relays and connect the feed to the battery.
As basic as you can get
Thread
Thread Starter
Forum
Replies
Last Post