1988 firebird gta distributor roader.
Thread Starter
Junior Member
Joined: Dec 2014
Posts: 24
Likes: 0
From: Siloam Springs Arkansas
Car: 1988 trans am gta
Engine: 305
Transmission: 700r4
Axle/Gears: 4.10
1988 firebird gta distributor roader.
Hey everyone, I havea 1988 firebird gta 305 tpi. Im not geting any spark to my wires, i replaced the coil, still no spark, and then I replaced the cap.. stil no spark, now im trying to repalce the roader and I cant figure out how to get it off. theres no bolts holding it down. Everyone tells me that I should be able to pull it right off. Its on there tight. Is there a certian way its supposed to be taken off? I need help! feedback would be appreciated !
Joined: Nov 2010
Posts: 5,892
Likes: 84
From: Mantua NJ
Car: 1 Owner 1986 TA with a WS6 package
Engine: 5.0 EFI
Transmission: THM700R4
Axle/Gears: 277 Posi Speedo
Re: 1988 firebird gta distributor roader.
If I'm not mistaking,it has two hex head screws holding it down
Joined: Jul 2000
Posts: 6,522
Likes: 92
From: Aridzona
Car: `86 SS / `87 SS
Engine: L69 w/ TPI on top / 305 4bbl
Transmission: `95 T56 \ `88 200-4R
Re: 1988 firebird gta distributor roader.
87-up is push-on.
Pull harder. Wiggle it. Tap with a hammer. It will come off
Pull harder. Wiggle it. Tap with a hammer. It will come off
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM