Tach Light Help
Thread Starter
Junior Member
Joined: Jun 2015
Posts: 5
Likes: 0
Tach Light Help
Hey folks,
Bought a Summit racing tach light (SUM-G2945) for my 1983 Z-28. I spliced the green signal lead to "TACH" on the distributor and grounded the back wire. Its not working after I run power to a 12v source. Instructions state that power must be 12v Switched source. They recommend the ignition switch. Can someone please tell me exactly where I need to pull the switched power from. Thanks! I appreciate any help!
Bought a Summit racing tach light (SUM-G2945) for my 1983 Z-28. I spliced the green signal lead to "TACH" on the distributor and grounded the back wire. Its not working after I run power to a 12v source. Instructions state that power must be 12v Switched source. They recommend the ignition switch. Can someone please tell me exactly where I need to pull the switched power from. Thanks! I appreciate any help!
Thread Starter
Junior Member
Joined: Jun 2015
Posts: 5
Likes: 0
Re: Tach Light Help
At this point Im just going to grab power and ground from the fuze box. in case its not power or ground can i take the tach signal from somewhere else?
Last edited by charlie0357; Jun 25, 2015 at 04:08 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
Hotrodboba400
Firebirds for Sale
0
Sep 2, 2015 07:28 PM
