Pulling needles from gauges
Thread Starter
Supreme Member
Joined: Aug 2002
Posts: 1,160
Likes: 40
From: ARIZONA
Car: 92 Trans Am Conv
Engine: LB9
Transmission: T5
Axle/Gears: 3.08
Pulling needles from gauges
Anybody able to tell me if they all pull out or if there are tricks to removing all the needles?
I need to repaint them and don't want to break anything.
I need to repaint them and don't want to break anything.
Joined: Sep 2000
Posts: 2,499
Likes: 194
From: Moorpark, CA
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: Pulling needles from gauges
Just give 'em a firm tug and they come right off.
Joined: Dec 2002
Posts: 273
Likes: 3
From: Northwestern,PA
Car: 89 GTA & 92 T/A covertible
Engine: 408LS-SC, 355 TPI
Transmission: 4L80e, 700r4
Axle/Gears: 12 bolt, 9 bolt
Re: Pulling needles from gauges
When I put stepper motors in late model GM clusters I use a fork with some masking tape on the side that contacts the gauge face, works like charm.