CCC distributor advancing without ECM
#1
CCC distributor advancing without ECM
'82 fb lg4:
CCC distributor advances from initial 9° BTDC at idle to 22° at 2500rpm (total).
The ECM is unplugged and also a Non-CCC carb installed.
How is this possible? Distributor doesn't have weights.
curve is something like:
9° @ 800 RPM
12@1200
15@1500
18@1800
20@2000
22@2500
i don't understand. the ccc distributor doesn't have any signal to advance the timing, it should do nothing. am i wrong?
CCC distributor advances from initial 9° BTDC at idle to 22° at 2500rpm (total).
The ECM is unplugged and also a Non-CCC carb installed.
How is this possible? Distributor doesn't have weights.
curve is something like:
9° @ 800 RPM
12@1200
15@1500
18@1800
20@2000
22@2500
i don't understand. the ccc distributor doesn't have any signal to advance the timing, it should do nothing. am i wrong?
#5
Supreme Member
iTrader: (2)
Join Date: Jan 2005
Location: Hurst, Texas
Posts: 9,996
Received 386 Likes
on
329 Posts
Car: 1983 G20 Chevy
Engine: 305 TPI
Transmission: 4L60
Axle/Gears: 14 bolt with 3.07 gears
Re: CCC distributor advancing without ECM
Alot of GM carbureted marine engines use the small HEI EST distributers running without any ECM input.