QuickStyle

i have a set of Hedman street headers #68471 when i bought them new from summit they cost me $350, their price has dropped to $300 since. Jet-Hot sells them for $430+shipping. i paid $180 to get these coated. so i have alot of money invested in these. they also come with a Jet Hot coated Y-pipe for DUAL cats. im not sure how much i would like to get for these, so im just looking for offers for now. the headers were only used on a engine stand for less than 2 hours on less than 10 runs. the y-pipe was never used, it is in brand new condition.
________________________

89formula350b2l

iTrader: (11)

how big are the headers and y pipe

QuickStyle

1 5/8" Primarys, 3" collectors. as for the y-pipe it looks to be 2 1/2" but it might be 2 1/4" it is mandrel bent though. either way the 2 1/4" is good for a little over 350HP

QuickStyle

$500 obo.
$430 - coated headers from jethot #68471
$150 - y-pipe from hedman #17490
$200 - to coat the y-pipe
$780 worth of new parts

ownor

iTrader: (5)

hi,
still have them?
how much is shipping to either 67219 kansas or austria?
thanks
edit: i think the y-pipe outlet should be 2.5", could you make sure about that?

QuickStyle

i could get it shipped to kansas for under $40 bucks. i dont know about austria, that price is up to you. the y-pipe is currently in storage, if you say it should be 2.5" then maybe it is, when i checked the pipe size i just eyeballed it, its the y pipe that hedman makes, so whatever size they used.....

tranceemotionz

would the headers alone line up with the factory cats? i dont need a y pipe cause my pipe comes after the dual cats... how much just for the headers???
would you consider a trade for a bbk power plus 58mm throttle body?

QuickStyle

im not sure if they line up or not, but hedmans website says something about exhaust has to be modified to retain stock catalytic converters. so i assume a little bit of fabrication needs to be done, probably 1/2 hours labor at the shop. i dont think i would seperate the headers and y pipe at the moment, unless i could find two seperate buyers. trades..... maybe, but not interested in the throttle body... sorry

vasquezmrysvll

iTrader: (5)

hi im near sac...would pick up be possible?also you said trades?what are you looking for...how much picked up?

QuickStyle

well im not really looking for trades, but if you got something, i might be interested, just let me know what you got. you can pick it up for $500

QuickStyle

just checked summit's website, they cost $340 now y-pipe still $150. $500 for new parts with free jet-hot coating??

Bull

iTrader: (5)

I'm interested.

Please PM me with your best price, shipped to 01002.

Thanks for your time.

lbman0007

Do you still have these heads? If so how many cc's are they and how much are you selling them for? what price for shipping to (70767)Port Allen, Louisiana ?

QuickStyle

Bull - PM has been sent

lbman0007 - this thread is for a set of headers, altho i do have another thread going for the Heads i have for sale you can click the link below to view it by the way that are 65cc combustion chambers 200cc runners.


https://www.thirdgen.org/forums/engi...-aluminum.html

QuickStyle

still for sale, make me an offer. i might seperate the headers and y-pipe if no one wants the whole package.

89formula350b2l

iTrader: (11)

I might be interested in them....but I want to make sure that the y pipe is 2.5 inches....I have Edelbrock TES on there right now and if I switch the only gain I would get is the collectors being .5" bigger....and the looks of jet coating of course....but i am comtemplating longtube setup too

QuickStyle

besides the collector being .5" bigger the overall design of these headers is better than the edelbrock's, so you would benefit more from just the headers only. and the edelbrock y-pipe design isn't very good either. after checking out the y-pipe i found that it is 2.25" so if you are set on a 2.5" y-pipe you could get one custom made, i got a price on a 2.5" y-pipe to the cats for $180.

ownor

iTrader: (5)

still for sale?
if yes, i would need to know how much you are taking including shipping to austria

thanks

QuickStyle

shipping will be completely up to you for shipping out of the country, due to so many flakes on here im not going to waste my time calling around to places for that, so if you are interested you need to find a shipping price. package will be coming from Bakersfield, CA. 93314 U.S.A.