Chevy Race Parts
Thread Starter
Senior Member
iTrader: (1)
Joined: Mar 2005
Posts: 696
Likes: 0
From: Springfield,Mo
Car: 87 Berlinetta,work in progress
Engine: 468 BB,still in the build process
Transmission: TH350,3500 stall
Axle/Gears: 9" Ford,learning how to live under
Chevy Race Parts
Still got a couple of things to sell.
Edelbrock Vic Jr intake for SBC,has extra inc of plenum cast into it,gasket matched to 1206 FelPro,perfect shape,no cracks,heli-coils,etc.A little dirty,but otherwise perfect.SOLD
Weiand Team G electric water pump for SBC,used maybe 3 hours.Again,clean it up a little,bolt it on and go.$125 shipped.
Holley 3310 750 vac. secondary carb.Never ran since rebuilt,completely unmolested.$100 shipped.
Holley 700 DP,with line and press. gauge.Choke removed,works great,ran very little since rebuild.This would be a great canidate for a ProForm main body,creating an HP style carb for cheap.$100 shipped.
Edelbrock 1406 Carb,625CFM w/ electric choke.Ran perfect when removed about 2 months ago,completely original.$75 shipped.
March aluminum P/S brackets for BBC w/ long waterpump.$50 shipped
March aluminum 2 groove lower pulley for SBC,bareley used.SOLD
BBC stamped chrome tall valve covers,chrome is in fairly bad shape,I was gonna beadblast and paint them,but bought new ones.$25 shipped.
if more than 1 part is desired,drop me an email and I'll discount shipping.Please email bloertcher@aol.com or call 417-844-8351 for any more details,can send photos.
Edelbrock Vic Jr intake for SBC,has extra inc of plenum cast into it,gasket matched to 1206 FelPro,perfect shape,no cracks,heli-coils,etc.A little dirty,but otherwise perfect.SOLD
Weiand Team G electric water pump for SBC,used maybe 3 hours.Again,clean it up a little,bolt it on and go.$125 shipped.
Holley 3310 750 vac. secondary carb.Never ran since rebuilt,completely unmolested.$100 shipped.
Holley 700 DP,with line and press. gauge.Choke removed,works great,ran very little since rebuild.This would be a great canidate for a ProForm main body,creating an HP style carb for cheap.$100 shipped.
Edelbrock 1406 Carb,625CFM w/ electric choke.Ran perfect when removed about 2 months ago,completely original.$75 shipped.
March aluminum P/S brackets for BBC w/ long waterpump.$50 shipped
March aluminum 2 groove lower pulley for SBC,bareley used.SOLD
BBC stamped chrome tall valve covers,chrome is in fairly bad shape,I was gonna beadblast and paint them,but bought new ones.$25 shipped.
if more than 1 part is desired,drop me an email and I'll discount shipping.Please email bloertcher@aol.com or call 417-844-8351 for any more details,can send photos.
Last edited by Irockz; Jun 3, 2006 at 11:48 AM.
Junior Member
Joined: May 2006
Posts: 13
Likes: 0
From: Fayetteville NC
Car: 83 camaro z/28
Engine: small block 350
Transmission: 700R4
Axle/Gears: stock (for now)
wassup bro im interested in gettin that 1406 eldelbrock, lemme know some more info and well have a deal
Last edited by z/28stud; May 28, 2006 at 10:26 PM.
Thread Starter
Senior Member
iTrader: (1)
Joined: Mar 2005
Posts: 696
Likes: 0
From: Springfield,Mo
Car: 87 Berlinetta,work in progress
Engine: 468 BB,still in the build process
Transmission: TH350,3500 stall
Axle/Gears: 9" Ford,learning how to live under
Originally Posted by z/28stud
wassup bro im interested in gettin that 1406 eldelbrock, lemme know some more info and well have a deal
Thread Starter
Senior Member
iTrader: (1)
Joined: Mar 2005
Posts: 696
Likes: 0
From: Springfield,Mo
Car: 87 Berlinetta,work in progress
Engine: 468 BB,still in the build process
Transmission: TH350,3500 stall
Axle/Gears: 9" Ford,learning how to live under
Intake and lower pulley have sold,I think the Edel. carb is sold,but it's pretty iffy right at the moment
Member
iTrader: (1)
Joined: Aug 2005
Posts: 166
Likes: 0
From: Chickasha, Oklahoma (central OK)
Car: 90 mustang LX
Engine: 5.0-302
Transmission: t-5
Axle/Gears: 8.8 w/3.08's with a trac-lock
Originally Posted by Irockz
Still got a couple of things to sell.
Edelbrock Vic Jr intake for SBC,has extra inc of plenum cast into it,gasket matched to 1206 FelPro,perfect shape,no cracks,heli-coils,etc.A little dirty,but otherwise perfect.SOLD
Weiand Team G electric water pump for SBC,used maybe 3 hours.Again,clean it up a little,bolt it on and go.$125 shipped.
Holley 3310 750 vac. secondary carb.Never ran since rebuilt,completely unmolested.$100 shipped.
Holley 700 DP,with line and press. gauge.Choke removed,works great,ran very little since rebuild.This would be a great canidate for a ProForm main body,creating an HP style carb for cheap.$100 shipped.
Edelbrock 1406 Carb,625CFM w/ electric choke.Ran perfect when removed about 2 months ago,completely original.$75 shipped.
March aluminum P/S brackets for BBC w/ long waterpump.$50 shipped
March aluminum 2 groove lower pulley for SBC,bareley used.SOLD
BBC stamped chrome tall valve covers,chrome is in fairly bad shape,I was gonna beadblast and paint them,but bought new ones.$25 shipped.
if more than 1 part is desired,drop me an email and I'll discount shipping.Please email bloertcher@aol.com or call 417-844-8351 for any more details,can send photos.
Edelbrock Vic Jr intake for SBC,has extra inc of plenum cast into it,gasket matched to 1206 FelPro,perfect shape,no cracks,heli-coils,etc.A little dirty,but otherwise perfect.SOLD
Weiand Team G electric water pump for SBC,used maybe 3 hours.Again,clean it up a little,bolt it on and go.$125 shipped.
Holley 3310 750 vac. secondary carb.Never ran since rebuilt,completely unmolested.$100 shipped.
Holley 700 DP,with line and press. gauge.Choke removed,works great,ran very little since rebuild.This would be a great canidate for a ProForm main body,creating an HP style carb for cheap.$100 shipped.
Edelbrock 1406 Carb,625CFM w/ electric choke.Ran perfect when removed about 2 months ago,completely original.$75 shipped.
March aluminum P/S brackets for BBC w/ long waterpump.$50 shipped
March aluminum 2 groove lower pulley for SBC,bareley used.SOLD
BBC stamped chrome tall valve covers,chrome is in fairly bad shape,I was gonna beadblast and paint them,but bought new ones.$25 shipped.
if more than 1 part is desired,drop me an email and I'll discount shipping.Please email bloertcher@aol.com or call 417-844-8351 for any more details,can send photos.
Thread Starter
Senior Member
iTrader: (1)
Joined: Mar 2005
Posts: 696
Likes: 0
From: Springfield,Mo
Car: 87 Berlinetta,work in progress
Engine: 468 BB,still in the build process
Transmission: TH350,3500 stall
Axle/Gears: 9" Ford,learning how to live under
I was figuring about $15 to ship on average,I'll take $80 for it w/o shipping it.Pretty good haul from Ok. to here,you come through here I take it?
Trending Topics
Member
iTrader: (1)
Joined: Aug 2005
Posts: 166
Likes: 0
From: Chickasha, Oklahoma (central OK)
Car: 90 mustang LX
Engine: 5.0-302
Transmission: t-5
Axle/Gears: 8.8 w/3.08's with a trac-lock
Originally Posted by Irockz
I was figuring about $15 to ship on average,I'll take $80 for it w/o shipping it.Pretty good haul from Ok. to here,you come through here I take it?
Thread Starter
Senior Member
iTrader: (1)
Joined: Mar 2005
Posts: 696
Likes: 0
From: Springfield,Mo
Car: 87 Berlinetta,work in progress
Engine: 468 BB,still in the build process
Transmission: TH350,3500 stall
Axle/Gears: 9" Ford,learning how to live under
Still have the Holleys,water pump,BB brackets,and I also have a polished alum. timing cover for SBC,like new.Start making offers on this stuff,$ talks!
Member
Joined: Dec 2005
Posts: 108
Likes: 0
From: cocoa beach florida
Car: 1987 pontiac firebird formula ws6
Engine: chevy 400 cubic inch V8
Transmission: turbo 350
can i get pics and info sent to imnottomhull@yahoo.com of the Holley 700 DP and electric water pump.
Thread Starter
Senior Member
iTrader: (1)
Joined: Mar 2005
Posts: 696
Likes: 0
From: Springfield,Mo
Car: 87 Berlinetta,work in progress
Engine: 468 BB,still in the build process
Transmission: TH350,3500 stall
Axle/Gears: 9" Ford,learning how to live under
Will do,I'll have pics tommorow
Thread Starter
Senior Member
iTrader: (1)
Joined: Mar 2005
Posts: 696
Likes: 0
From: Springfield,Mo
Car: 87 Berlinetta,work in progress
Engine: 468 BB,still in the build process
Transmission: TH350,3500 stall
Axle/Gears: 9" Ford,learning how to live under
Here's the waterpump,700DP has sold.
Thread Starter
Senior Member
iTrader: (1)
Joined: Mar 2005
Posts: 696
Likes: 0
From: Springfield,Mo
Car: 87 Berlinetta,work in progress
Engine: 468 BB,still in the build process
Transmission: TH350,3500 stall
Axle/Gears: 9" Ford,learning how to live under
Originally Posted by bpeters113
i was wondering if the Edelbrock 1406 and/or Holley 3310 carbs were still available?
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
20
Nov 14, 2015 12:02 AM
