New int/exh valves (Mid Ga)
Thread Starter
Junior Member
Joined: Jun 2002
Posts: 91
Likes: 0
From: Ga.
Car: 1984 Z-28
Engine: 350(bored 0.060)
Transmission: Probuilt TH700-r4 tranny with the w
Axle/Gears: 10 bolt 7.5" posi 3.42
New int/exh valves (Mid Ga)
**SOLD**
I have a set of Manley Race Series 1.94 and 1.60 valves. These valves, with a little work from a porting kit, can get the 081, 801, and 416 heads to flow up to 220cfm at .500 lift. They are one piece, swirl polished, undercut. and in their original wrappers. I have another post where I'm selling a set of 081 heads for $50 o.b.o.
Though they come for $87 dollars a set (of 8) from Summit racing, I'm selling them both for $100 + s/h.
You can email me at midnyte81@aol.com or
milton.brown@garobi.ang.af.mil
Cell: (478) 319-5169
I have a set of Manley Race Series 1.94 and 1.60 valves. These valves, with a little work from a porting kit, can get the 081, 801, and 416 heads to flow up to 220cfm at .500 lift. They are one piece, swirl polished, undercut. and in their original wrappers. I have another post where I'm selling a set of 081 heads for $50 o.b.o.
Though they come for $87 dollars a set (of 8) from Summit racing, I'm selling them both for $100 + s/h.
You can email me at midnyte81@aol.com or
milton.brown@garobi.ang.af.mil
Cell: (478) 319-5169
Last edited by Midnyte81; Aug 22, 2006 at 09:08 PM. Reason: update
Thread
Thread Starter
Forum
Replies
Last Post
355tpipickup
Tech / General Engine
9
Sep 13, 2015 11:35 PM