Im going a COMPLETELY different way with my 89 Trans Am so i have decided to sale all my performance parts.Im open to trades and cash for anything just ask me.

SLP Headers 1 3/4 inch primarys with 3inch y-pipe and Mat Catback exhaust with Flowmaster 80-series. Everybit of the exhaust is Ceramic coated except where i welded in the new Cat. asking price 600 for whole system. I would rather not part it but i guess i can just expect it to cost more.

SLP Runners, Edelbrock High Flow Intake, port matched plenum and Stock throttle body with the SLP cold air intake for Firebirds. whole setup 600 will sell the CAI for 100 bucks only thing that needs to be done is the K&N needs to be cleaned.

Eibach Pro Lowering springs and KYB AGX shocks for all 4 corners. 400 bucks. i just need your old setup to keep my chassis rolling until i get the stuff i need.

Stock L98 make me an offer i dunno what its worth, it runs great smokes a lil on startup(valve stem seals) but clears up the first time the gas pedal is hit.

T-5 with pedals, shifter, well hell everything even a brand new clutch and Flywheel. its everything u need for the swap. with new Master and Slave Cylinders. umm lets say 400? sound good i dunno its what i paid for it.

Moats Adapter for TPI cars with 2 MAF chips, one modified one stock. lets go with 35bucks.

B&M Mega Shifter for 3rd gen 75 bucks cuz i broke the shift cable when i pulled my tranny.

4th Gen console modified to fit That Mega Shifter ill say 50.

i think thats all unless u want crappy interior pieces.(my interior is torn up from previous owner) umm but anything that u might want from a parts car let me know. My name is Mark and my number is 512-565-3603 will ship most things if buyer pays shipping i have no prob getting u a quote if u give me a few hours. unfortinately i have no pictures at this time, i havent even started pulling the parts off yet. but if u want it ill make sure its the next thing off the car.

 

PM SENT ON T5 SWAP!!

 

Email Sent

 

Responded to both already.

 

all i have is $400 for the intake setup put illl take it tonight if thats good with you

 

sell just the runners?

Speed

 

how about everything but the runners to silverta for 400 and the runners to speed for the 200. i come out with my 600 and yall get what you want im a lil flexible so just talk to me.

 

ill take the runners and base only for $400 you can get a new base from summit for less then $400 let me know

 

What year is the cold air intake setup for and is it the SLP brand? I have an 89 GTA with TPI setup and am looking for a SLP brand CAI.

 

Guess I should of read your ad more carefully. I will give you $75 for the Cold air kit.

 

How much for just the SLP runners and the Plenumn?

 

100 for the CAI plus shipping.(thats almost 200 off cuz it has the K&N)
Runners by them self 175 plus shipping (thats half the price on SLP website.)

Runners and Plenum ummm since the plenum is ported, lets say 175+75=250? sound good?

i do have a few sales pending from people on here and one local as soon as i can get some pictures today ill post them.
----------
OH one thing i forgot, the Edelbrock baseplate has bigger injectors, i dont know what size they are i just know they arent stock. if anyone knows how to test or just see how big they are let me know so i can let yall know.

 

I offered $75, because I have the K & N. Send me some pics on the plenumn and the runners and the intake if you would. Do you know if the runners match up to a stock L98 intake?

 

PM sent

 

i honestly dont know if it will bolt up or not id assume it would. and if u have the regular K&N for stock air intake it wont work its to tall.

 

Didn't know they were different the K & N's, so add $25 to my offer. If the pics look good I will purchase. I checked the SLP website and it appears the runners bolt up to stock intakes.

 

The parts are still on the car in hope that the car sells as a whole locally. but with all the offers ive been getting on here i think im gonna go ahead and start pulling stuff off. here are some pictures of it on the car. and remember all the wires and **** u see is my wireing harness just laying around.

 

ill have more tonight of the CAI and whatever else yall wanted. but my phone takes a LONG time to send emails.

 

PM sent!

 

and the CAI

 

SO do you want to sell or not? I will buy the CAI and runners if you want to sell them.

 

ill sell u the CAI but i have an offer on the table from a local guy for my whole TPI setup so if u want just the CAI its 100 plus shipping. and hell ill even throw in a new recharge kit cuz i know it needs it.

 

are the runners siamesed?
is the port job clean or sloppy?

i have the money in hand if you can get me pics of the port job

speed

 

I am interested in the SLP headers and the Y pipe. Will you seperate these? If not at what point in the exhaust will you seperate. I do not need a cat back or the cat(s) really but I may need cat(s) in the future. What kind of
cat(s) are they?

Where are you located?

 

Runners are not siameesed alll the way through, just at each end. port job is very clean in my opinion i had a friend of mine do it who does all his own P&P work on his engines. Yes im willing to seperate the headers and Y-pipe 500 and ill cut it off before the cat. but leave u enough to chop more if needed.

 

Where are you at? What type of cat? $500 for the headers and Y and $600 for the whole sheebang?? That's not to proportional. Any pictures of the cat back? Did you have to dent the drivers side header to clear the steering shaft?

 

advise on thread if this has been sold...where are you located?

 

pics of the console please to ergall81@hotmail.com

 

price on just the lowering springs?

 

Hello, regarding your list of items for sale, I'll purchase the console and shifter together if they are in visually great shape (I would think I could buy the cable elsewhere)/If you want to sell the springs, how long do you need to keep them in order to roll your rocket around? (maybe I could buy now and you could ship later??? )
And lastly, are you set up with Paypal??? Go ahead and send me a PM and I'll give you a phone call back if stuff is still available.
Thanks, Nitro

 

Firechicken, i know its not proportional, the headers are 720 new with smaller ypipe, and catbacks can be had easier then headers so ya know supply and demand thing. The cat is a Hollowed out Catco cat. 3inch in 3inch out. and i only have a clearence issue with the headers under REALLY hard cornering when the body torques so they are greatly marked for where they need to be dimpled.

T-5 setup has been sold, just sold it around 1030 mytime. im pulling it tomorrow and delivering it tomorrow night.

On the console i pulled it today, i just put it in the attic and so in the morning i will pull it and take a picture. on the shifter i need to find what box its in since i just moved. The only thing other then being dirty thats not Lookable(???) is that the actualy **** is just been worn past the original coat and looks like a non finished piece of aluminum.you will c in the picture tomorrow.

Sold the springs and shocks also today locally for 500 and old springs and shocks. so they are off the market.

Traded all my seats yesterday for a single aluminum Racing seat.

I am located just outside Austin Texas 78660 is my zip if yall wanna check your own shipping in comparison to mine, ive been quoting the people that have asked by fedex,it seems to be cheaper with the larger items. let me know if i missed anything.

 

PM sent about CAI!

 

hey man, I really appreciate you letting me know that the T5 setup was sold. I emailed you on Friday and you said that you would get it out by tues and send me some pics. I asked you to hold it for me and told you to "make me first in line as I have cash in hand". Dont put stuff on here and advertise that it is for sale and then say well I got someone looking at the whole car. Thats bad business. Also dont bs the people on here and then sale the stuff locally, at least tell us that it is for sale locally. I dont know where you learned your business practices but any one looking to buy from this guy beware, because he seems really shady

Seth

 

ok bigseth, u wanna upsell him? i just got 600 for the tranny go ahead.

 

All I am trying to say is dont put stuff on this board for sale and then sell it out from under someone regardless of price. The least you could have done is sent me a message telling me the deal. But that all goes back to you not having good business ethics. By the way why would I offer you more money when you set the price at $400. Wait till the idiot you F'ed in the A for $600 finds out that you only wanted $400 for the whole deal.

PS I hope you gave him a bottle of KY for that $600.


Seth

 

i posted as soon as i found out the deal was gonna happen. and your right he got ****ed on the deal but he dont know that and i dont care. i hate doing business but ohwell.

 

did you sell the whole intake in the end ???????????

 

runners???????????????

Speed

 

Whole intake is up for sale still. my buyer backed out at the last minute i decided i dont wanna part out the intake i wanna sell it as a whole. I will trade my whole TPI setup for carb setup. i need carb, intake manifold and Dist. atleast a 750 carb that is ready to go.

 

so its been a while were are you at on the intake setup

 

Are they still available or did you give up on the whole thing?

 

Sale pending as of today ill find out in the morning and let yall know.

 

DO you still have your intake setup? Let me know.

 

What about just the springs?

 

Hey, do you still have the tranny swap? If so, how many miles? Since the motor smokes, I'd only offer $400 if it's complete. If you'd be interested, I have a 1979 Malibu 2 door project that just needs some work to get back on the road that I'd trade for the motor and the tranny.

 

is the exhuast system still available, i'm after the whole lot, headers to tail pipes? can it be disassembled to ship to florida? many miles on the muffler?
thanks
A