Performance parts Comp Hyd roller cam!
Thread Starter
Member
iTrader: (1)
Joined: Aug 2001
Posts: 105
Likes: 0
From: Thomasville Pa USA
Car: 86 SC Camaro drag car
Engine: 406
Transmission: Th350
Axle/Gears: 8.5 10 bolt 4.10
Performance parts Comp Hyd roller cam!
Comp Cams Hyd roller Xtreme Energy series for factory roller blocks
P/N 08-443-8 Dur @.006 294 in 300 ex
@.050 242 in 248 ex
Lift w/ 1.5 .540 in .562 ex
Lobe separation 110
I had this cam in tha car for about 20 passes or so...pulled like hell on top end but was lame coming out...ran 11.60 @116mph with 1.72 60' with a mild Vortec shortblock and Dart heads. Switched to a smaller cam...didnt leave any better!...turned out the torque converter had taken a dump.(DUH) Switched converter and fixed the launch...never got around to puttin in this cam. Am building a 400 for next year and can't use this one now anyhow. I figured I would put it on here and see if anyone could use it before puttin it on fleabay this weekend. Cam is in great shape with just the marks on it from the rollers going around...otherwise looks like new. I also have a brand new set of Hyd Roller lofters for a OEM application...I forget the brand off hand but they are quality lifter and still in the boxes. Finally for now...a Weiand Stealth intake....gasket matched to Fel Pro 1205...worked great too, was on the car for the 11.60 pass
CAM $175 shipped in continental US
Lifters $75 shipped " " "
Intake $50 PLUS shipping
P/N 08-443-8 Dur @.006 294 in 300 ex
@.050 242 in 248 ex
Lift w/ 1.5 .540 in .562 ex
Lobe separation 110
I had this cam in tha car for about 20 passes or so...pulled like hell on top end but was lame coming out...ran 11.60 @116mph with 1.72 60' with a mild Vortec shortblock and Dart heads. Switched to a smaller cam...didnt leave any better!...turned out the torque converter had taken a dump.(DUH) Switched converter and fixed the launch...never got around to puttin in this cam. Am building a 400 for next year and can't use this one now anyhow. I figured I would put it on here and see if anyone could use it before puttin it on fleabay this weekend. Cam is in great shape with just the marks on it from the rollers going around...otherwise looks like new. I also have a brand new set of Hyd Roller lofters for a OEM application...I forget the brand off hand but they are quality lifter and still in the boxes. Finally for now...a Weiand Stealth intake....gasket matched to Fel Pro 1205...worked great too, was on the car for the 11.60 pass
CAM $175 shipped in continental US
Lifters $75 shipped " " "
Intake $50 PLUS shipping
Supreme Member
iTrader: (7)
Joined: Mar 2005
Posts: 1,926
Likes: 3
From: mid GA
Car: 88 IROC
Engine: 305 TPI w/ l98 cam
Transmission: T5 5-speed
Axle/Gears: 3.45 posi disc 9 bolt
Comp Cams Hyd roller Xtreme Energy series for factory roller blocks
P/N 08-443-8 Dur @.006 294 in 300 ex
@.050 242 in 248 ex
Lift w/ 1.5 .540 in .562 ex
Lobe separation 110
I had this cam in tha car for about 20 passes or so...pulled like hell on top end but was lame coming out...ran 11.60 @116mph with 1.72 60' with a mild Vortec shortblock and Dart heads. Switched to a smaller cam...didnt leave any better!...turned out the torque converter had taken a dump.(DUH) Switched converter and fixed the launch...never got around to puttin in this cam. Am building a 400 for next year and can't use this one now anyhow. I figured I would put it on here and see if anyone could use it before puttin it on fleabay this weekend. Cam is in great shape with just the marks on it from the rollers going around...otherwise looks like new. I also have a brand new set of Hyd Roller lofters for a OEM application...I forget the brand off hand but they are quality lifter and still in the boxes. Finally for now...a Weiand Stealth intake....gasket matched to Fel Pro 1205...worked great too, was on the car for the 11.60 pass
CAM $175 shipped in continental US
Lifters $75 shipped " " "
Intake $50 PLUS shipping
P/N 08-443-8 Dur @.006 294 in 300 ex
@.050 242 in 248 ex
Lift w/ 1.5 .540 in .562 ex
Lobe separation 110
I had this cam in tha car for about 20 passes or so...pulled like hell on top end but was lame coming out...ran 11.60 @116mph with 1.72 60' with a mild Vortec shortblock and Dart heads. Switched to a smaller cam...didnt leave any better!...turned out the torque converter had taken a dump.(DUH) Switched converter and fixed the launch...never got around to puttin in this cam. Am building a 400 for next year and can't use this one now anyhow. I figured I would put it on here and see if anyone could use it before puttin it on fleabay this weekend. Cam is in great shape with just the marks on it from the rollers going around...otherwise looks like new. I also have a brand new set of Hyd Roller lofters for a OEM application...I forget the brand off hand but they are quality lifter and still in the boxes. Finally for now...a Weiand Stealth intake....gasket matched to Fel Pro 1205...worked great too, was on the car for the 11.60 pass
CAM $175 shipped in continental US
Lifters $75 shipped " " "
Intake $50 PLUS shipping
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
Aug 20, 2017 12:16 AM
84z96L31vortec
North East Region
1
Aug 10, 2015 08:27 PM
