*compucar 10lb bottle.
Just Polished.! have Brand new stickers to put back on it.

*NOS Superpower Shot Solenoids.

*NOS External Fuel Pump

*Single nozzle like the blue middle one here.
http://www.thunderracing.com/catalog/summaries/s615.jpg


This is the Kit.
http://www.holley.com/05176TBNOS.asp
http://www.thunderracing.com/catalog...d=179&pcid=161

I will take pic's of the bottle and solenoids,etc later.
The switch,is missing, I do have a relay,fuses wire leads,etc.

LOOKING TO TRADE FOR AFTERMARKET RUNNERS !

 

Bottle Pic's
http://www.cecoatings.com/images/fs/...s%20Bottle.jpg
http://www.cecoatings.com/images/fs/...%20Bottle2.jpg
http://www.cecoatings.com/images/fs/NOS%20PARTS.jpg

Will consider other trades or sell outright for $375 OBO SHIPPED !!

 

can it be used on a carb motor? it list it for an lt1? also what size jets come with it?

 

Im sure it could be if you have a carb plate
Id have to look at the jets. I belive a 68 and 78.

Prob adapt it over to a TPI plate that goes behind the TB also if anyone else is interested.

 

$300 + shippin..
Just takin up space here. As Im not gonna use it.

 

last bump..
lotsa Pms but no
"I'll take it" yet..

 

^^^^

 

one more time...BUMP.
then off to the collection of misc. parts in the spair room.

 

is the kit new?
what does it need to be on a tpi?

thanks

Lee

 

what else does it need from the manifold I will probably either plumb into the manifold or just use a plate.

 

Its a used kit. can be ran on a TPI like it is. Just run the nozzle about with in 6inches of the TB. into the boot.

or find a TPI plate if you want.

 

what else is needed as far as switches or any other relays?

 

throttle micro switch is there. So you will need a on/off activation switch.

and anything else you want to add. (fuel cut off ,window switch etc) progressive controller. but to just hook it up a arm on/off switch.

 

TTT,