355 SBC
$2500 obo.

*Edelbrock Torker Manifold

*350 Bored .030

*New Crank

*main and rod bearings

*edelbrock hydraulic cam 2102

*edelbrock hydraulic lifters

*-*Cam specs:
Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: Idle-5,500 RPM
Intake Duration at 050 inch Lift: 204
Exhaust Duration at 050 inch Lift: 214
Duration at 050 inch Lift: 204 int./214 exh.
Advertised Intake Duration: 278
Advertised Exhaust Duration: 288
Advertised Duration: 278 int./288 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.420 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.442 in.
Valve Lift with Factory Rocker Arm Ratio: 0.420 int./0.442 exh. lift
Lobe Separation (degrees): 112

*New Distributor

*Gear Driven Timing


I have no problem shipping this engine.
Any Questions about engine give me a call...

765-479-3279
765-447-9426

or email me at...

JWeast23@aol.com

or IM me at...

JWeast23

 

$2400 obo.

765-479-3279
Jon

 

could this engine be hooked up to a tpi set up?

 

To what I have read... Yes it will bolt up to A TPI set-up.

https://www.thirdgen.org/tbitotpi

Jon

 

I forgot to include in my description it comes with a

new Fuel Pump

for $125 more I will include a set of Ceramic Coated Shorty Headers.

Jon

 

I will deliver up to 50 miles for free.

Jon W.
765-479-3279

 

anyone interested?

 

???

 

bump

 

I, sir am interested. What would i need to do to have it running in my 87 firebird, lots or little? live in VA

 

well as far as i know; if you opt for the headers, it will need:


Carb
Plugs -- AC Delco
Wires -- Prestolite
Water Pump -- Reman
Harmonic Balancer -- Pioneer
Oil Filter -- Wix

I can get you the rest of the parts, except the Carb, for $175. I work for Carquest. I will use my cost for these items. All these are premium parts not cheaply made Auto Zone parts.

The carb is up to you.


Jon

 

The headers WILL NOT fit in your F-body Firebird, these paticular headers are for Street Rod's. Part no. PTE H8052-1.They will come down right on top of motor mount. The Summit tech said they are for a Street rod application where side motor mounts are not used. The reason I know this is because about two months ago I needed some headers, saw jweast's ad on here trying to sell them. Before I sent $, I checked the part number and called Summit to confirm. I then informed jweast that they would not fit on a f-body.
http://store.summitracing.com/partde...5&autoview=sku

1-800-630-3030

 

Thank you for that. If you read above I'm selling them seperate, for that reason. I included in this ad the option to buy them, they are not included with this engine unless the purchaser wants to buy them. Thanks.

Jon

 

I dont think I read what kind of heads are on the motor!

 

Quite frankly, you should have made it clear that these headers would not fit on an f-body. It looks like your trying to give the impression that they WILL fit with your comment above "well as far as i know; if you opt for the headers, it will need:"

I didn't read anywhere where you mentioned these headers would not fit a f-body. I informed you of this two months ago when you tried to sell them to me! You even told me they would fit my car, because I asked you.

Your being dishonest about this makes me question just how honest you are concerning the rest of the stuff your trying to sell.

 

They are 1.94 head's.

 

You need to post casting numbers for anyone interested in this motor. Any headwork been done also.

 

Sorry about that I thought I had.

Engine Block Casting:
3970010

Cylinder Head Casting:
458642

Any other questions let me know.

Jon

 

Also, the only thing that have been done to the heads is they were cleaned, new seals, resurfaced and checked for cracks. Jon

 

Price Reduced.... $2200 FIRM!!!

JWeast23@aol.com

Jon

 

bump

 

waste of my time. not for sale anymore!!!