Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
Thread Starter
TGO Supporter
Joined: Dec 2001
Posts: 2,308
Likes: 0
From: ELIZABETH,PA,USA
Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
Well just as heading says, Have hooker LT's coated but years of use on them with o2 bungs in both, Mufflex Y-Pipe dual 3" into single 4", PA racing tubular K-Member(red),1-tubular A-Arm driver side, set of coil overs and lakewood 90/10's newer, springs are 175 lbx14" long for lots of stored energy for weight transfer, PA racing does free exchange on springs in case they are not what you want, stock GTA 16" light weight honeycomb pattern wheels grey centers front tires 30% rear et streets pretty bald but still hook well..
Much more I am sure, just ask.... Rebuilt 356 short block, hyperutechtic pistons, stock rods/crank balanced.
Stock rear sway bar, much more...
Will have pictures of all soon as I have some time or upon request asap.
All parts are off of my now wrecked 10 seconds Trans-am in sig.. all proven parts.. 350 is not, it was from the car though - roller block.
Prices:
Super comp. Headers coated. (2210's): $200
Y-Pipe: $150
k-member: $200
Front coil overs: $150 afco springs - lifetime guaranted. * sold 11sec91z
struts: $100 *sold 11sec91z*
Wheels: $150
Engine: $750
These are not shipped prices.
would prefer pick-up/local delivery but will ship...
Much more I am sure, just ask.... Rebuilt 356 short block, hyperutechtic pistons, stock rods/crank balanced.
Stock rear sway bar, much more...
Will have pictures of all soon as I have some time or upon request asap.
All parts are off of my now wrecked 10 seconds Trans-am in sig.. all proven parts.. 350 is not, it was from the car though - roller block.
Prices:
Super comp. Headers coated. (2210's): $200
Y-Pipe: $150
k-member: $200
Front coil overs: $150 afco springs - lifetime guaranted. * sold 11sec91z
struts: $100 *sold 11sec91z*
Wheels: $150
Engine: $750
These are not shipped prices.
would prefer pick-up/local delivery but will ship...
Last edited by 87_TA; Apr 24, 2007 at 10:38 PM.
Member
iTrader: (11)
Joined: Jan 2004
Posts: 376
Likes: 1
From: Romeoville ,Il.
Car: 1990 RS/SS modified
Engine: 355ci, 113 heads, LT4 hotcam
Transmission: T5
Axle/Gears: 3.73 Eaton posi
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
Sorry to hear you wrecked your car, hope you're ok.
What dod you want for the K-member, shipped to 60446?
What dod you want for the K-member, shipped to 60446?
Member
Joined: Aug 2005
Posts: 119
Likes: 0
From: PA
Car: 1992 25th Anniversary White W/ Red
Engine: Procharged 383CI/ Soon LS2 Turbo
Transmission: Manual 700R4
Axle/Gears: 4:11/Auburn Posi/Moser Axle
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
a
Last edited by 92KRVZ28; Apr 23, 2007 at 11:48 AM. Reason: delete
Member
Joined: Aug 2005
Posts: 119
Likes: 0
From: PA
Car: 1992 25th Anniversary White W/ Red
Engine: Procharged 383CI/ Soon LS2 Turbo
Transmission: Manual 700R4
Axle/Gears: 4:11/Auburn Posi/Moser Axle
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
Very interested in the K-Member and Arms
Please Send me Pictures if you have them, to vanluvanee23@yahoo.com
also would need shipping to 18902
Please Send me Pictures if you have them, to vanluvanee23@yahoo.com
also would need shipping to 18902
Thread Starter
TGO Supporter
Joined: Dec 2001
Posts: 2,308
Likes: 0
From: ELIZABETH,PA,USA
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
Hi Guys,
Will post pics soon - had to wait for ins.before I could rip into..
As mentioned in first post - there is only 1 a-arm, the other is bent!
The K-member does not have spring perches so you need the coil overs as well unless you have your own.
Also, the k-member does not work with stock a-arms - there is not enough clearance.. But most tubulars will fit according to PA racing..
Will post pics soon - had to wait for ins.before I could rip into..
As mentioned in first post - there is only 1 a-arm, the other is bent!
The K-member does not have spring perches so you need the coil overs as well unless you have your own.
Also, the k-member does not work with stock a-arms - there is not enough clearance.. But most tubulars will fit according to PA racing..
Trending Topics
Thread Starter
TGO Supporter
Joined: Dec 2001
Posts: 2,308
Likes: 0
From: ELIZABETH,PA,USA
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
There is currently intrest in the whole set-up from another member, but first pay first serve.. Will have pictures wed. at latest.. sorry for wait..
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
are you gonna sell the convo pros?
Thread Starter
TGO Supporter
Joined: Dec 2001
Posts: 2,308
Likes: 0
From: ELIZABETH,PA,USA
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
Sorry Matt,
Gonna keep those.. Picking up a 94 V6 firebird as a transplant car..
Also willing to parts trade possible for 4th gen headers, 90/10 struts, k-member.. ect..
Gonna keep those.. Picking up a 94 V6 firebird as a transplant car..
Also willing to parts trade possible for 4th gen headers, 90/10 struts, k-member.. ect..
Thread Starter
TGO Supporter
Joined: Dec 2001
Posts: 2,308
Likes: 0
From: ELIZABETH,PA,USA
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
Pictures:
Got to ripping into car with the sawz-all - got one coil over and strut off - wanted to get the side that was hit first to make sure all is ok...
Can also see headers,K-Member, A-Arm,
Forgot to mention that the A-Arms are chromoly..
Got to ripping into car with the sawz-all - got one coil over and strut off - wanted to get the side that was hit first to make sure all is ok...
Can also see headers,K-Member, A-Arm,
Forgot to mention that the A-Arms are chromoly..
Member
iTrader: (2)
Joined: May 2005
Posts: 334
Likes: 1
From: Palatine, IL
Car: 87 iroc
Engine: 454 .030 over
Transmission: th-350
Axle/Gears: 9 bolt
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
is it 150 bucks for the entire coil over kit? what does it include, what would i need to buy? does it have the strut tower brace and everything?
Member
iTrader: (1)
Joined: Aug 2005
Posts: 294
Likes: 2
From: Middle GA
Car: 1992 RS
Engine: Vortec Headed 383 9.6:1
Transmission: TKO600
Axle/Gears: 10 Bolt Posi 3.73
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
what y-pipe is it? for the 2210's?
Thread Starter
TGO Supporter
Joined: Dec 2001
Posts: 2,308
Likes: 0
From: ELIZABETH,PA,USA
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
Big Dreams: Yes Y-Pipe is for 2210s
Nicroc: Coil over kit includes whats in picture less struts unless you buy them, everything you need is included for kit.. Sleeve, top retainer,spring, adjustment collar..
Note to all, the top of most struts need to be ground even with strut tube body in order for sleeve to slide over. You will see that mine have been ground on top for this..
Nicroc: Coil over kit includes whats in picture less struts unless you buy them, everything you need is included for kit.. Sleeve, top retainer,spring, adjustment collar..
Note to all, the top of most struts need to be ground even with strut tube body in order for sleeve to slide over. You will see that mine have been ground on top for this..
Thread Starter
TGO Supporter
Joined: Dec 2001
Posts: 2,308
Likes: 0
From: ELIZABETH,PA,USA
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
Update
Super comp. Headers coated. (2210's): $200
Y-Pipe: $150
k-member: $200 sold 87z-ya peding
Front coil overs: $150 afco springs - lifetime guaranted. sold 11sec91zpending
struts: $100 sold 11sec91z pending
Wheels: $150
Engine: $750
These are not shipped prices.
would prefer pick-up/local delivery but will ship...
Super comp. Headers coated. (2210's): $200
Y-Pipe: $150
k-member: $200 sold 87z-ya peding
Front coil overs: $150 afco springs - lifetime guaranted. sold 11sec91zpending
struts: $100 sold 11sec91z pending
Wheels: $150
Engine: $750
These are not shipped prices.
would prefer pick-up/local delivery but will ship...
Last edited by 87_TA; Apr 24, 2007 at 11:06 PM.
Junior Member
iTrader: (2)
Joined: Apr 2006
Posts: 81
Likes: 0
From: Paducah, KY
Car: 87 IROC
Engine: 406
Transmission: th350
Axle/Gears: 10 bolt 3.73
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
Are the LT's all dented up or anything? Also, are those aluminum heads off the motor for sale?
Thread Starter
TGO Supporter
Joined: Dec 2001
Posts: 2,308
Likes: 0
From: ELIZABETH,PA,USA
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
They are on bottom a little from car bottoming out on occasion,
they look great from on top, collectors have a little rust in the coating like most do eventually.. will have good pics tomorrow.
no restriction though.. was a 10 second car..
Alum heads, no, sorry.
Junior Member
Joined: Aug 2006
Posts: 78
Likes: 0
From: greensboro nc
Car: 91 camaro z28
Engine: 383 with all holley performance
Transmission: 700r4 built for race
Axle/Gears: 3.73 limited slip
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
hi! i'm iterested on the headers and y pipe will tou take $280 for both incluiding shiping? let me know man.
Thread Starter
TGO Supporter
Joined: Dec 2001
Posts: 2,308
Likes: 0
From: ELIZABETH,PA,USA
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
hi! i'm iterested on the headers and y pipe will tou take $280 for both incluiding shiping? let me know
thanks for asking
----------
Sorry,
rear is not for sale yet..
----------
Updated listing:
Super comp. Headers coated. (2210's): $200 (sold)
Y-Pipe: $150
Wheels: $150 (sold)
Engine: $750
These are not shipped prices.
would prefer pick-up/local delivery but will ship...
Last edited by 87_TA; Apr 26, 2007 at 01:57 PM. Reason: Automerged Doublepost
Joined: Sep 2003
Posts: 25,895
Likes: 429
From: Pittsburgh PA
Car: 89 Iroc-z
Engine: 555 BBC Turbo
Transmission: TH400
Axle/Gears: MWC 9” 3.00
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
headers were sold already. Tom hasnt been on the boards for alittle while, not sure why, but i hope he responds soon.
Member
iTrader: (12)
Joined: Dec 2005
Posts: 383
Likes: 3
From: NY
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
that K member and suspension set up are nice pieces where did you purchase them from??
Joined: Feb 2005
Posts: 4,505
Likes: 90
From: West Warwick RI, postal code: 02893
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Tubular K-Member, Hooker LT's, Mufflex Y-Pipe and more.
Interested in the Y. $ in hand. Post back and you got it.
Thread
Thread Starter
Forum
Replies
Last Post
no green
Engine/Drivetrain/Suspension Parts for Sale
11
Jan 9, 2016 09:22 PM
92rsvortec350
Engine/Drivetrain/Suspension Parts for Sale
19
Oct 9, 2015 09:39 AM
