FOR SALE custom grind lo3 TBi cam and lifters

Thread Tools
 
Search this Thread
 
Old Jan 4, 2008 | 06:36 PM
  #1  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
FOR SALE custom grind lo3 TBi cam and lifters

It's a custom grind hydraulic roller cam from delta cams 203 duration 450 lift both intake and exhaust. The cam was pulled from my 89 rs, and it only has 8500 miles on it. I also will include the lifter guide plates and locking girdle. I am asking $150 shipped, and I payed almost $400 for the cam and lifter kit. I will have pics soon.

Last edited by kronos; Jan 4, 2008 at 07:06 PM.
Reply
Old Jan 5, 2008 | 01:11 PM
  #2  
Pat Hall's Avatar
Supreme Member
iTrader: (31)
 
Joined: Nov 2000
Posts: 3,347
Likes: 3
From: Roy,UT USA
Re: FOR SALE custom grind lo3 TBi cam and lifters

How well did it work with the stock prom? Might be interested if it works good without any prom work. Thanks.
Reply
Old Jan 5, 2008 | 11:07 PM
  #3  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

That's actually about as big as you can go without any prom tuning. I ran it with the stock prom and it ran great.
Reply
Old Jan 7, 2008 | 06:14 PM
  #4  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

Here are a couple of pics






I also found a timing chain, cam and crank sprocket that I had, so that will go as well.
Reply
Old Jan 7, 2008 | 10:09 PM
  #5  
lovemymaro's Avatar
Junior Member
 
Joined: Sep 2007
Posts: 59
Likes: 0
From: Stedman, NC
Car: 1991 Camaro Rs
Engine: 305 TBI
Transmission: 700-r4 with no OD :(
Axle/Gears: 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

anybody scoop this up yet? if not id love to get it.
Reply
Old Jan 7, 2008 | 10:13 PM
  #6  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

No sir, they are still available

Here is a link to a video of what the car sounded like with the cam in it.
http://www.youtube.com/watch?v=wtJn7_WrLhw

Last edited by kronos; Jan 7, 2008 at 10:23 PM.
Reply
Old Jan 8, 2008 | 05:34 PM
  #7  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

Everything above goes for $150 shipped.
Reply
Old Jan 9, 2008 | 09:50 AM
  #8  
jmoney91's Avatar
Junior Member
 
Joined: Jul 2007
Posts: 34
Likes: 0
From: gaithersburg, maryland
Car: 91 RS
Engine: 5.0l tbi
Transmission: T-5
Axle/Gears: whatever the stock one are 3.08 :-p
Re: FOR SALE custom grind lo3 TBi cam and lifters

still have it? if so what kinda hp numbers you talkin?
Reply
Old Jan 9, 2008 | 05:42 PM
  #9  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

yes it's still available. I never was able to get the car to a dyno so i'm not sure on actual hp increase. The lift on the stock cam is only 234 intake 257 exhaust, so it's a substantial difference between the two. With this cam and a good tune i'm sure 30-40 hp will be easy to obtain.
Reply
Old Jan 10, 2008 | 12:49 AM
  #10  
vipershark11's Avatar
Supreme Member
iTrader: (6)
 
Joined: Apr 2005
Posts: 1,459
Likes: 2
From: CT
Car: 92 trans am clone
Engine: LO3
Transmission: 700r4
Re: FOR SALE custom grind lo3 TBi cam and lifters

sorry but stock LO3 cam lift is .3xx .3xx recheck your numbers in the tech article.
Reply
Old Jan 10, 2008 | 08:29 AM
  #11  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

Yeah they could be wrong, but I got the specs straight out of my chiltons manual.
Reply
Old Jan 11, 2008 | 11:19 PM
  #12  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

Still for sale
Reply
Old Jan 12, 2008 | 01:05 AM
  #13  
vipershark11's Avatar
Supreme Member
iTrader: (6)
 
Joined: Apr 2005
Posts: 1,459
Likes: 2
From: CT
Car: 92 trans am clone
Engine: LO3
Transmission: 700r4
Re: FOR SALE custom grind lo3 TBi cam and lifters

your car sounded mean with that cam, very nice.
Reply
Old Jan 12, 2008 | 11:44 AM
  #14  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

Thanks. I have to get some new vids up, now with the new cam in the car sounds so much better.
Reply
Old Jan 13, 2008 | 10:03 PM
  #15  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

TTT
Reply
Old Jan 14, 2008 | 08:02 AM
  #16  
ezliving4ume's Avatar
Member
iTrader: (1)
 
Joined: Nov 2005
Posts: 196
Likes: 0
From: rochester,in.
Car: Forrest 91 t/a
Engine: 5.0 tpi w/underdrive/accel,full 3"
Transmission: 700r4
Axle/Gears: 3.73 pos
Re: FOR SALE custom grind lo3 TBi cam and lifters

Not much into motors but I thought I'd ask will it work on and lb9
Reply
Old Jan 14, 2008 | 11:15 PM
  #17  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

I'm pretty sure it will, to my knowledge an lb9 block is a roller block.
Reply
Old Jan 15, 2008 | 05:21 AM
  #18  
ezliving4ume's Avatar
Member
iTrader: (1)
 
Joined: Nov 2005
Posts: 196
Likes: 0
From: rochester,in.
Car: Forrest 91 t/a
Engine: 5.0 tpi w/underdrive/accel,full 3"
Transmission: 700r4
Axle/Gears: 3.73 pos
Re: FOR SALE custom grind lo3 TBi cam and lifters

I'm going to do some checking, why are you getting rid of it?
Reply
Old Jan 15, 2008 | 05:28 PM
  #19  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

Well cs the car is no longer tbi it's carbureted, and I put a set of dart heads and a magnum 280h cam in it
Reply
Old Jan 16, 2008 | 03:08 AM
  #20  
1991CamaroRslow's Avatar
Supreme Member
iTrader: (3)
 
Joined: Oct 2005
Posts: 1,833
Likes: 0
From: Cincinatti OH
Car: 1991 L03 700r4 RS
Engine: 1987 WS6 Trans AM Lb2
Transmission: Th350 red neck Performance 3k stall
Axle/Gears: 95 Mustang 8.8 built with 3.73s
Re: FOR SALE custom grind lo3 TBi cam and lifters

125 shipped? Cash is in hand!
Reply
Old Jan 16, 2008 | 05:51 PM
  #21  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

$150 is a steal already
Reply
Old Jan 16, 2008 | 10:17 PM
  #22  
1991CamaroRslow's Avatar
Supreme Member
iTrader: (3)
 
Joined: Oct 2005
Posts: 1,833
Likes: 0
From: Cincinatti OH
Car: 1991 L03 700r4 RS
Engine: 1987 WS6 Trans AM Lb2
Transmission: Th350 red neck Performance 3k stall
Axle/Gears: 95 Mustang 8.8 built with 3.73s
Re: FOR SALE custom grind lo3 TBi cam and lifters

It's cool Kronos I literally just paid for an LT1 cam. I'm kind of glad I didn't double bid myself on this. Good luck on the sale, I'm sure someone will take you up on this.
Reply
Old Jan 18, 2008 | 07:55 PM
  #23  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

TTT
Reply
Old Jan 20, 2008 | 10:27 AM
  #24  
F_N_JUNK's Avatar
Member
iTrader: (4)
 
Joined: Jan 2008
Posts: 202
Likes: 0
From: NW Indiana
Car: 1991 Camaro
Engine: Morris 434 Single Turbo
Transmission: TH350
Axle/Gears: 9" Ford w/4.11's
Re: FOR SALE custom grind lo3 TBi cam and lifters

Originally Posted by vipershark11
your car sounded mean with that cam, very nice.
Actually his car sounded just like a John Deere tractor, sorry man, but it did, maybe if you would have keft the exhaust hooked up it would have sounded MUCH MUCH better.
Reply
Old Jan 20, 2008 | 11:03 AM
  #25  
jbpnumber03's Avatar
Member
iTrader: (4)
 
Joined: Sep 2007
Posts: 158
Likes: 0
Re: FOR SALE custom grind lo3 TBi cam and lifters

Originally Posted by F_N_JUNK
Actually his car sounded just like a John Deere tractor, sorry man, but it did, maybe if you would have keft the exhaust hooked up it would have sounded MUCH MUCH better.
come on man, this isnt really the place to critisize someone's product they're trying to sell. Between your post to this and to smallblockling, you're being a **** to put it politely.
Reply
Old Jan 20, 2008 | 06:46 PM
  #26  
F_N_JUNK's Avatar
Member
iTrader: (4)
 
Joined: Jan 2008
Posts: 202
Likes: 0
From: NW Indiana
Car: 1991 Camaro
Engine: Morris 434 Single Turbo
Transmission: TH350
Axle/Gears: 9" Ford w/4.11's
Re: FOR SALE custom grind lo3 TBi cam and lifters

Originally Posted by jbpnumber03
come on man, this isnt really the place to critisize someone's product they're trying to sell. Between your post to this and to smallblockling, you're being a **** to put it politely.
If you actually READ my post, you would see that I was not saying anything bad about the part he has for sale and I actually just made an observation to it sounding like the JD I got in the shop, and that it would sound better if he didnt have the exhaust cut-out at the Y-pipe like it says, thats all, I honestly could not even hear a cam in the video.
Reply
Old Jan 20, 2008 | 08:26 PM
  #27  
hoppy's Avatar
Junior Member
iTrader: (1)
 
Joined: Mar 2007
Posts: 33
Likes: 0
Car: '89 Firebird
Engine: L03 305 TBI
Transmission: 700R4
Axle/Gears: 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

Could I run this with stock heads?
Reply
Old Jan 20, 2008 | 09:50 PM
  #28  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

Yes, it will run with stock heads. When I had it in the car I had stock heads.
Reply
Old Jan 21, 2008 | 10:14 PM
  #29  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

Originally Posted by F_N_JUNK
Actually his car sounded just like a John Deere tractor, sorry man, but it did, maybe if you would have keft the exhaust hooked up it would have sounded MUCH MUCH better.

Yeah I guess it did, but not anymore. http://www.youtube.com/watch?v=p4uaOcQtPTM

Still here!!
Reply
Old Jan 22, 2008 | 11:01 PM
  #30  
vipershark11's Avatar
Supreme Member
iTrader: (6)
 
Joined: Apr 2005
Posts: 1,459
Likes: 2
From: CT
Car: 92 trans am clone
Engine: LO3
Transmission: 700r4
Re: FOR SALE custom grind lo3 TBi cam and lifters

sounds even better, what cam do you have in it now? and what muffler on it?
Reply
Old Jan 23, 2008 | 05:18 PM
  #31  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

Comp Cams 280h 10 230/480, and a flowmaster 40 series. I need some gears now to help out with the cam.

Last edited by kronos; Jan 23, 2008 at 05:29 PM.
Reply
Old Jan 26, 2008 | 10:11 PM
  #32  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

Still got it.
Reply
Old Jan 31, 2008 | 08:58 PM
  #33  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

TTT
Reply
Old Feb 10, 2008 | 06:50 PM
  #34  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

TTT
Reply
Old Mar 21, 2008 | 07:56 PM
  #35  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

TTT
Reply
Old Mar 21, 2008 | 08:12 PM
  #36  
bob8703's Avatar
Member
 
Joined: Oct 2007
Posts: 215
Likes: 3
Re: FOR SALE custom grind lo3 TBi cam and lifters

ok i have a 305 tpi will this make a difference on my car. i have the money but i want to make sure it will be worth it. that and i have to ask my bud if he will be willing to help me.
Reply
Old Mar 23, 2008 | 06:19 PM
  #37  
TADailyDriver's Avatar
Senior Member
iTrader: (8)
 
Joined: Feb 2008
Posts: 550
Likes: 0
From: Lowell, Michigan
Car: 1988 Trans Am, 2005 Sierra 2500
Engine: Vortec 357
Transmission: Built TH700R4 with 26-2800 Stall
Axle/Gears: GM 10 bolt 3.73 Posi
Re: FOR SALE custom grind lo3 TBi cam and lifters

will this work even tho my lo3 hasnt been bored out at all? all ill have to do it use bigger valve springs correct?
Reply
Old Mar 23, 2008 | 07:33 PM
  #38  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

Yep, just use stiffer valve springs
Reply
Old Mar 23, 2008 | 09:43 PM
  #39  
TADailyDriver's Avatar
Senior Member
iTrader: (8)
 
Joined: Feb 2008
Posts: 550
Likes: 0
From: Lowell, Michigan
Car: 1988 Trans Am, 2005 Sierra 2500
Engine: Vortec 357
Transmission: Built TH700R4 with 26-2800 Stall
Axle/Gears: GM 10 bolt 3.73 Posi
Re: FOR SALE custom grind lo3 TBi cam and lifters

what type of cam is this again? and is the timing chain a dual roller or single?
Reply
Old Mar 24, 2008 | 02:22 PM
  #40  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

It's a Delta custom grind cam, and the timing chain is a single roller
Reply
Old Apr 15, 2008 | 09:17 PM
  #41  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

Still available
Reply
Old May 9, 2008 | 08:53 PM
  #42  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

OK $125 obo shipped
Reply
Old May 9, 2008 | 11:29 PM
  #43  
bob8703's Avatar
Member
 
Joined: Oct 2007
Posts: 215
Likes: 3
Re: FOR SALE custom grind lo3 TBi cam and lifters

man if there would be a good power gain i would love to get this but... the thing that kind of turns me away from it is the video. you dont have a video with an actual exhaust on it and that cam. that is a video with no exhaust right. it just sounds like there is no up and down idle sounds to it its just steady.
Reply
Old May 10, 2008 | 06:37 AM
  #44  
Street Lethal's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (16)
 
Joined: Jul 2003
Posts: 10,536
Likes: 204
From: NYC / Jersey
Car: 1990 Trans Am GTA
Engine: Turbo 305 w/MS2
Transmission: 700R4
Re: FOR SALE custom grind lo3 TBi cam and lifters

^ That really shouldn't deter anybody. Frankly, I'm very shocked that this cam setup didn't go for $150.00 already. Had I still had an LO3, it would have been bought the same day it was listed....
Reply
Old May 10, 2008 | 12:29 PM
  #45  
bob8703's Avatar
Member
 
Joined: Oct 2007
Posts: 215
Likes: 3
Re: FOR SALE custom grind lo3 TBi cam and lifters

Originally Posted by Street Lethal
^ That really shouldn't deter anybody. Frankly, I'm very shocked that this cam setup didn't go for $150.00 already. Had I still had an LO3, it would have been bought the same day it was listed....
well im the kind of guy that likes to have power but also wants my car to sound awsome. i like going through a tunnel with the windows down and hearing the deep rumble of my exhaust now. im not saying that that cam didnt sound good, im just saying that the exhaust covered up the sound of the cam because it was out of the Y. ive been looking everywhere for a video of a v8 with that same grind cam but cant find any. that and i really dont know if it will be much of an improvment for my 305 TPI or not.
Reply
Old May 10, 2008 | 12:58 PM
  #46  
Street Lethal's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
iTrader: (16)
 
Joined: Jul 2003
Posts: 10,536
Likes: 204
From: NYC / Jersey
Car: 1990 Trans Am GTA
Engine: Turbo 305 w/MS2
Transmission: 700R4
Re: FOR SALE custom grind lo3 TBi cam and lifters

^ The exhaust system (or lack of) is the real culprit there, as even my '98 LS1 would sound horrible if I pulled the exhaust off, what engine wouldn't, really? I would never recommend a camshaft for anyone without delving into DCR/SCR first. But as far as the sound in the video, that shouldn't deter your decision, because his exhaust is off, and should sound like that....
Reply
Old May 10, 2008 | 01:44 PM
  #47  
bob8703's Avatar
Member
 
Joined: Oct 2007
Posts: 215
Likes: 3
Re: FOR SALE custom grind lo3 TBi cam and lifters

Originally Posted by Street Lethal
^ The exhaust system (or lack of) is the real culprit there, as even my '98 LS1 would sound horrible if I pulled the exhaust off, what engine wouldn't, really? I would never recommend a camshaft for anyone without delving into DCR/SCR first. But as far as the sound in the video, that shouldn't deter your decision, because his exhaust is off, and should sound like that....
thats why i was asking if he had any videos with the exhaust on because i have the same set up as he does.
Reply
Old May 22, 2008 | 09:22 PM
  #48  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

No I don't have any other vids with the exhaust on with that cam, but you're not going to get a choppy idle with anything under 214 in duration.
Reply
Old Jul 11, 2008 | 12:03 AM
  #49  
kronos's Avatar
Thread Starter
Junior Member
 
Joined: Apr 2006
Posts: 86
Likes: 0
From: Hollywood FL
Car: 89RS
Engine: Lo3 bored.030 over, 230/480comp cam
Transmission: 700r4 10" converter
Axle/Gears: Stock G80 2.73
Re: FOR SALE custom grind lo3 TBi cam and lifters

TTT
Reply
Old Jul 11, 2008 | 04:25 PM
  #50  
TADailyDriver's Avatar
Senior Member
iTrader: (8)
 
Joined: Feb 2008
Posts: 550
Likes: 0
From: Lowell, Michigan
Car: 1988 Trans Am, 2005 Sierra 2500
Engine: Vortec 357
Transmission: Built TH700R4 with 26-2800 Stall
Axle/Gears: GM 10 bolt 3.73 Posi
Re: FOR SALE custom grind lo3 TBi cam and lifters

if noone buys it by next week i may buy this from you. ill pm u and let you know. My engine is most;y stock so no tuning involved? i will need to buy new spring tho correct?
Reply



All times are GMT -5. The time now is 04:19 AM.