I have a set of edlebrock vortec aluminum cylinder heads and edlebrock performer rpm air gap intake. Heads were originally 200cc intake runner, 64cc combustion chamber, with 2.02in intake valves and 1.60in exhaust valves. I ported intake runners to intake gasket and de burred intake runner as well as blended bowl area. I also de burred cumbustion chamber and cleaned up exhaust ports. I also did 3 angle valve job, cause I never trust valve gring from manufacturer. I also milled heads to a 62cc combustion chamber, and after porting the intake runners are now at 214cc. I also port matched intake. I'm looking to get $1100 plus shipping for heads and intake. I will include valves, valve springs, retainers, and keepers with heads. It would be up to you to shim valve springs for your application. I only ran this combination for 1 year and am selling due to these heads have straight spark plug holes and are not angled which is a problem with the style headers I am running. A shorty style header would work perfect. These heads and intake produced plenty of power on my 383 and would love to keep them on if they were angle plug heads, and yes I bought these heads brand new. If intereste drop me a pm or reply. If pictures are needed leave an e mail address and can e mail pics.

 

Are you willing to separate? If so, how much for just the intake?

 

Sorry really dont want to seperate due to heads and intake are port matched. It would take alot of work to port match another intake.