***POSSIBLE*** Engine block sale in DC_MD_VA Area (PG County)
Thread Starter
Senior Member
Joined: Jan 2001
Posts: 769
Likes: 4
From: DC_MD_VA Area
Car: 1991 Camaro RS
Engine: L03 305 V-8 (for now ;) )
Transmission: T-5 5 speed
Axle/Gears: stock... whatever that means :)
***POSSIBLE*** Engine block sale in DC_MD_VA Area (PG County)
Hello all.
I would like to sell the block that I am using to build a NORMALLY ASPIRATED 383...
The block is a late-model 1-piece rear seal roller cam style 350. It has already been line-bored and fitted with splayed 4-bolt Milodon STEEL main caps (center 3 ony, of course). The block has been magnafluxed and has no cracks. The block has already been decked and has been bored to 4.025" (the last .005" will need to be bored when pistons are purchased). Deck plugs have been installed. I was gonna get the block filled to the freeze plugs but this has not been done yet.
I would like to sell the block, main caps, main studs, and a set of 6-inch Eagle rods (Part #SIR6000BBL, I-beam, bushed).
Here are some pics...
All machine work was done by Precision Engine Machine in Hyattsville MD. I will get the casting number tomorrow if needed.
Make me an offer. Serious offers ONLY. And PLEASE be reasonable. I would like to sell locally. I would prefer to meet the buyer IN PERSON at the machine shop when the transaction takes place.
Thanks!
I would like to sell the block that I am using to build a NORMALLY ASPIRATED 383...
The block is a late-model 1-piece rear seal roller cam style 350. It has already been line-bored and fitted with splayed 4-bolt Milodon STEEL main caps (center 3 ony, of course). The block has been magnafluxed and has no cracks. The block has already been decked and has been bored to 4.025" (the last .005" will need to be bored when pistons are purchased). Deck plugs have been installed. I was gonna get the block filled to the freeze plugs but this has not been done yet.
I would like to sell the block, main caps, main studs, and a set of 6-inch Eagle rods (Part #SIR6000BBL, I-beam, bushed).
Here are some pics...
All machine work was done by Precision Engine Machine in Hyattsville MD. I will get the casting number tomorrow if needed.
Make me an offer. Serious offers ONLY. And PLEASE be reasonable. I would like to sell locally. I would prefer to meet the buyer IN PERSON at the machine shop when the transaction takes place.
Thanks!
Thread Starter
Senior Member
Joined: Jan 2001
Posts: 769
Likes: 4
From: DC_MD_VA Area
Car: 1991 Camaro RS
Engine: L03 305 V-8 (for now ;) )
Transmission: T-5 5 speed
Axle/Gears: stock... whatever that means :)
Re: ***POSSIBLE*** Engine block sale in DC_MD_VA Area (PG County)
^^^BUMP^^^
Thread Starter
Senior Member
Joined: Jan 2001
Posts: 769
Likes: 4
From: DC_MD_VA Area
Car: 1991 Camaro RS
Engine: L03 305 V-8 (for now ;) )
Transmission: T-5 5 speed
Axle/Gears: stock... whatever that means :)
Re: ***POSSIBLE*** Engine block sale in DC_MD_VA Area (PG County)
Hey twolfe...
I meant to get in touch with the machine shop but I have been swamped at work. Im not exactly sure how much I have tied up in this block. I will find out sometime next week.
I meant to get in touch with the machine shop but I have been swamped at work. Im not exactly sure how much I have tied up in this block. I will find out sometime next week.
Thread
Thread Starter
Forum
Replies
Last Post
theshackle
Tech / General Engine
4
Mar 5, 2017 06:37 PM