FS: GTA Ball Joints - New - ACDelco - Pics
FS: GTA Ball Joints - New - ACDelco - Pics
Guys,
I found in my garage a pair of both driver & passenger side front AC Delco Ball Joints that I was going to use for my 87 GTA. Well I sold my GTA and I still have these in the garage that needs to go. These are BRAND NEW from the Pontiac dealer. GM#88911525. I paid ~$60 for the pair. Shoot me an offer for these. Any reasonable offer I will accept.
Attached is a picture of the ball joints. I took one out to show you exactly what it looks like when you open the box....
113_1375.jpg?t=1214607392
and a pic of my old lady...
113_1360.jpg?t=1214607085
So shoot me an offer guys...Thanks!!
I found in my garage a pair of both driver & passenger side front AC Delco Ball Joints that I was going to use for my 87 GTA. Well I sold my GTA and I still have these in the garage that needs to go. These are BRAND NEW from the Pontiac dealer. GM#88911525. I paid ~$60 for the pair. Shoot me an offer for these. Any reasonable offer I will accept.
Attached is a picture of the ball joints. I took one out to show you exactly what it looks like when you open the box....
113_1375.jpg?t=1214607392
and a pic of my old lady...
113_1360.jpg?t=1214607085
So shoot me an offer guys...Thanks!!
Joined: Feb 2008
Posts: 567
Likes: 14
Car: 1987 GTA Vert & 1991 GTA 5 Speed
Engine: 87 GTA-L98 91 GTA LB9
Transmission: GTA-700R4 & GTA T5
Re: FS: GTA Ball Joints - New - ACDelco - Pics
Hey Im interested in these. Got an 87 GTA need to see what my bill is going to be on an engine swap I had done. If the funds are avail I will be getting back to you. Hope they will still be there
Re: FS: GTA Ball Joints - New - ACDelco - Pics
JUST MAKE SOME OFFERS...BEST OFFER GETS THESE...
Trending Topics
Junior Member
iTrader: (1)
Joined: Jul 2006
Posts: 30
Likes: 0
From: Southeast PA
Car: 1991 Firebird
Engine: LHO 3.1 L V6
Transmission: A4
Axle/Gears: 3.23
Re: FS: GTA Ball Joints - New - ACDelco - Pics
hey im not too familiar with this type of stuff. i recently took my car in for an alignment but they said that could not do it bc my front lower ball joints were so worn. funny, bc i live in PA and i passes inspection there. i had to have my idler arm replaced but my mechanic said nothing about the ball joints.
my car is a 1991 firebird, 3.1L. are these 87 GTA specific or will these work for pretty for other years and models as well. sorry if i waste your time!? thank you in advance
my car is a 1991 firebird, 3.1L. are these 87 GTA specific or will these work for pretty for other years and models as well. sorry if i waste your time!? thank you in advance
Joined: Sep 2000
Posts: 2,504
Likes: 195
From: Moorpark, CA
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: FS: GTA Ball Joints - New - ACDelco - Pics
That's a common scheme shops run. They say they can't do an alignment until they are replaced and then offer to replace them and occasionally offer you a "good deal" to do the ball joints at the same time. Its a scam.
Junior Member
iTrader: (1)
Joined: Jul 2006
Posts: 30
Likes: 0
From: Southeast PA
Car: 1991 Firebird
Engine: LHO 3.1 L V6
Transmission: A4
Axle/Gears: 3.23
Re: FS: GTA Ball Joints - New - ACDelco - Pics
^^yeah i pulled the car out and getting a second opinion on it just for that reaon
Thread
Thread Starter
Forum
Replies
Last Post
Thirdgen89GTA
NW Indiana and South Chicago Suburb
0
Aug 20, 2015 03:11 PM
NBrehm
Engine/Drivetrain/Suspension Parts for Sale
0
Aug 5, 2015 07:57 PM






Let me know if you are intrested in them...thanks! 

